Specification Sheet

adorneTM GUIDE SPECIFICATIONS
Project Name Project No. Date
Project Location 16140-14 Wiring Devices
screwless and snap onto the metal frame. All wall plates are UL and ETL-
approved.
B. Wall plates are ETL and UL tested and listed for compliance with UL 514D.
Specifier Note: Retain as many of the following products as required for a specific project and
delete the others.
Specifier Note: Insert the appropriate part number in the first bracketed box below from the
manufacturer’s catalog to correspond to the number of gangs of the device that plate is paired
with. Insert number of gangs in second bracketed box below. Retain finish and color as required
for a specific project and delete the others.
C. Wall Plates, Cast Metals: adorne
™
Part No. [Insert manufacturer’s part number] [Insert
number of gangs and modules as designated by part number] [Aged Bronze] [Antique
Bronze] [Antique Nickel] [Brushed Brass] [Brushed Pewter] [Brushed Stainless Steel]
[Dark Burnished Pewter] [Oil-Rubbed Bronze] [Satin Bronze] [Satin Nickel] finish and
color.
Specifier Note: Insert the appropriate part number in the first bracketed box below from the
manufacturer’s catalog to correspond to the number of gangs of the device that plate is paired
with. Insert number of gangs in second bracketed box below. Retain finish and color as required
for a specific project and delete the others.
D. Wall Plates, Real Materials: adorne
™
Part No. [Insert manufacturer’s part number]
[Insert number of gangs and modules as designated by part number] [Black Leather]
[Brushed Stainless] [French Oak] [Mirror Black] [Mirror White] [Wenge Wood] [Custom
with Magnesium Trim] [Custom with White Trim] finish and color.
Specifier Note: Insert the appropriate part number in the first bracketed box below from the
manufacturer’s catalog to correspond to the number of gangs of the device that plate is paired
with. Insert number of gangs in second bracketed box below. Retain finish and color as required
for a specific project and delete the others.
E. Wall Plates, Plastics: adorne
™
Part No. [Insert manufacturer’s part number] [Insert
number of gangs and modules as designated by part number] [Bronze] [Cherry] [Gloss
White] [Graphite] [Honey] [Lichen Green] [Pale Blue] [Plum] [Satin Light Almond] [Soft
Touch Felt Green] [Soft Touch Moss Grey] [Soft Touch Russet] [Titanium] [Turquoise
Blue] finish and color.
PART 3 - EXECUTION
3.1 EXAMINATION
Specifier Note: Retain one (1) of the options in the first paragraph below and delete the other
one.
A. Examine conditions under which wiring devices and accessories are to be installed.
Notify the [Architect/Engineer] [Construction Manager] in writing of conditions
detrimental to proper completion of the work. Do not proceed with work until
unsatisfactory conditions have been corrected.
3.2 INSTALLATION
A. Strictly comply with manufacturer's installation instructions and recommendations.
Coordinate installation with adjacent work to ensure proper clearances and to prevent
electrical hazards.