Specifications

ManualsBrandsLegrand ManualsLightingAdorne Under Cabinet Power Cable Extender

adorneTM GUIDE SPECIFICATIONS

Project Name Project No. Date

Project Location 16513-1 Under-Cabinet Lighting System

SECTION 16513

UNDER-CABINET LIGHTING SYSTEM

PART 1 - GENERAL

1.1 CONDITIONS AND REQUIREMENTS

A. The General Conditions, Supplementary Conditions, and Division 1 – General

Requirements apply.

1.2 SECTION INCLUDES

A. Under-cabinet lighting system.

1.3 RELATED SECTIONS

Specifier Note: In this article, specify work specified in other sections that is related to work of

this section.

A. Division 16 - Electrical: Electrical systems and components.

Specifier Note: The following paragraph is a sample that may be used in this article. Add to or

delete from the following as appropriate for the specific project.

B. Section [xxxxx] – [Section Title]: [Include brief description of work specified in another

section that is related to the work of this section.]

1.4 SUBMITTALS

Specifier Note: In this article, specify various types of data to be furnished by the contractor be-

fore, during, or after construction. Topics included in this article are: product data, shop draw-

ings, samples, design data, test reports, certificates, manufacturers’ instructions, manufacturers’

field reports, qualification statements, and closeout submittals.

A. Submit under provisions of Section [01330] [______].

B. Product Data: Submit for each type of product specified.

C. Samples: Submit one (1) [___________] sample for each type of under-cabinet

lighting system component specified with required color and finish. Show standard

color and finish ranges available.

1.5 QUALITY ASSURANCE

Specifier Note: In this article, describe qualifications, regulatory requirements, certifications,

field samples, mock-ups, and pre-installation meetings.

A. Manufacturer Qualifications: Firms regularly engaged in manufacture of under-cabinet

lighting system components of the types and sizes required, whose products have

been in satisfactory use in similar service for not less than 10 years.

B. Source Limitations: Obtain each type of under-cabinet lighting system component

through one (1) source from a single manufacturer.

C. Under-Cabinet Lighting System Components: Listed and labeled by cETLus.

1.6 DELIVERY, STORAGE AND HANDLING

A. Deliver under-cabinet lighting system components in factory labeled packages.

Summary of content (5 pages)

PAGE 1
adorne GUIDE SPECIFICATIONS TM SECTION 16513 UNDER-CABINET LIGHTING SYSTEM PART 1 - GENERAL 1.1 A. 1.2 A. 1.3 CONDITIONS AND REQUIREMENTS The General Conditions, Supplementary Conditions, and Division 1 – General Requirements apply. SECTION INCLUDES Under-cabinet lighting system. RELATED SECTIONS Specifier Note: In this article, specify work specified in other sections that is related to work of this section. A. Division 16 - Electrical: Electrical systems and components.
PAGE 2
adorne GUIDE SPECIFICATIONS TM B. Store and handle in strict compliance with manufacturer’s written instructions and recommendations. C. Protect from damage due to weather, excessive temperature, and construction operations. PART 2 - PRODUCTS 2.1 MANUFACTURERS A.
PAGE 3
adorne GUIDE SPECIFICATIONS TM [titanium] [white] color; allow three (3) inches on each side for installations with corner connectors; ETL Listed. Specifier Note: Every under-cabinet lighting system must include one of the below control boxes or direct wire connector. Retain the type of control boxes as required for a specific project and delete the others. C. Control Boxes: 1. 2. 3. 4. 5. 6. Control Box with Paddle Dimmer: adorne™ Part No.
PAGE 4
adorne GUIDE SPECIFICATIONS TM 5. 6. 7. 8. 9. 10. 8" Joiner Cable: adorne™ Part No. ALSLJC8[TM4][W4], [titanium] [white] color; can be used to place an 8-inch space between two (2) lights, or paired with another cable for an even longer space between two (2) lights; ETL Listed. 14" Joiner Cable: adorne™ Part No.
PAGE 5
adorne GUIDE SPECIFICATIONS TM detrimental to proper completion of the work. unsatisfactory conditions have been corrected. 3.2 A. Do not proceed with work until INSTALLATION Strictly comply with manufacturer's installation instructions and recommendations. Coordinate installation with adjacent work to ensure proper clearances and to prevent electrical hazards. Specifier Note: The under-cabinet lighting system can also be installed in front of wall finishes such as stone, tile, marble, etc.