Product Brochure

54
UNDER-CABINET LIGHTING & POWER SYSTEM
How to Specify the System
The adorne Under-Cabinet Lighting System is a fully customizable and modular solution for eliminating kitchen clutter. It is compatible
with any kitchen layout, such as a galley, L-shaped, or U-shaped, as well as with any home wiring. In order to ensure you have specified
the correct products for your system, we recommend you follow the steps outlined below.
1. Planning Your System Layout
First, determine where you want to install the system.
Then measure your cabinets to determine the length of
Modular Track required:
• Measure each cabinet length at back of cabinet.
• For installations with a corner, allow 3” on each side
for Corner Connector.
• When totaling up the length of required Modular Track,
be sure to include the length of the desired Control Box or
Direct Wire Connector. For a 1-gang box, allow 5”.
For a 2-gang box, allow 5.25”. For Direct Wire Connector,
allow 6”. For more detail on Control Box options, see page 53.
• If your selection of Modular Tracks does not match the exact
length of your cabinets, you can use a Modular Track Extender
to complete the track. This piece can be cut down to 6”.
Standard 12”, 18”, and 27” Modular Tracks cannot
be shortened.
2G
1G
1G
18
27
27
18
27
18
12
EX
12 EX DWC27 2718
c
c
c
(cut to 6.75”)
(cut to 9.75”)
12” Modular Track
18” Modular Track
18” Modular Track Extender
Modular Track Corner Connector
27” Modular Track
• One 2-Gang Control Box is placed at
one end of system for hardwired power
connection and lighting control
• Total length of cabinets can be exactly
matched with combination of standard
Modular Tracks
• As needed, Control Boxes can be placed
anywhere in system
• 1-Gang Control Boxes are placed
at both ends of the system for hardwired
power connection and lighting control
• Modular Track Extender is custom-cut
to match exact length of cabinets
• Direct Wire Connector is placed at
one end of system for hardwired
power connection
• Light control located in nearby wallbox
• GFCI circuit breaker located in
electrical panel
*
Sample Installation: Length of cabinets is equal to
combined length of standard Modular Tracks
Sample Installation: Length of cabinets is greater than
combined length of standard Modular Tracks
Sample Installation: Direct wire with system controls
in a remote location
56”
57”
60”
42”
36”
36”
Visit www.adornemyhome.com to watch planning and
installation videos.
9” Modular Track