Datasheet

ManualsBrandsLegrand ManualsLightingSwitchgear cabinet socket F (CEE 7/4)

1. RANGE

10/16 A - 250 V±

- 2 P + E with safety shutters

- 2 P + E with safety shutters and tamperproof for protected or

specialized circuits

- 2 P + E German standard

2. DIMENSIONS

3. ELECTRICAL CHARACTERISTICS

• Thermal current: 10/16 A

• Rated voltage 250 V

• Overvoltage category 1.2/50 µs: 4 kV±

• Dielectric strength: 2 kV±

4. REFERENCE STANDARDS

IEC 884-1

NF C 61-303

5. MECHANICAL CHARACTERISTICS

• Environmental conditions

Storage temperature: - 10 °C to + 70 °C

Operating temperature: - 5 °C to + 40 °C

• Mechanical resistance: IP xx3

87045 LIMOGES Cedex

Telephone: +33 5 55 06 87 87 - Fax: +33 5 55 06 88 88

Technical sheet: FA243A

Cat. No(s): 042 80/82/85

Date: 27.11.97

Power sockets

5. MECHANICAL CHARACTERISTICS (continued)

• Materials

Density 1.18 to 1.25

Bending module > 2.20 GPa

Casing Polycarbonate Incandescent wire 960 °C / 30 s

Oxygen index ≥ 34

Colour Grey RAL 7035

Screw Zinc bichromate finish steel

Contacts Nickel-plated copper

6. INSTALLATION

• Wiring

Conductors permitted

Flexible with end caps 1.5 to 6 mm

Rigid 1.5 to 10 mm

Tools required:

Flat blade screwdriver ø 4 to 5.5 mm

Posidrive screwdriver Pz 1

Tightening torque

Min. 0.8 Nm

Max. 1.8 Nm

Recommended 1.2 Nm

Cage terminals, with combined Posidrive, releasable and captive

screws

Protection against direct contact: IP 2x

Slot on the top of the socket to allow the busbar to pass through

Busbar connection possible. For phase and neutral, connection from

the bottom

44,5

042 80

042 82

042 85

Summary of content (2 pages)

PAGE 1
Technical sheet: FA243A Power sockets 87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 - Fax: +33 5 55 06 88 88 Cat. No(s): 042 80/82/85 Date: 27.11.97 042 85 042 82 042 80 1. RANGE 5. MECHANICAL CHARACTERISTICS (continued) 10/16 A - 250 V± - 2 P + E with safety shutters - 2 P + E with safety shutters and tamperproof for protected or specialized circuits - 2 P + E German standard • Materials Casing 2. DIMENSIONS 66 44,5 Screw Contacts 44 Density 1.18 to 1.25 Bending module > 2.
PAGE 2
Power sockets Technical sheet: FA243A Cat. No(s): 042 80/82/85 Date: 27.11.97 6. INSTALLATION (continued) 6. INSTALLATION (continued) • Mounting - Mounted on symmetrical rail EN 50-022 • Power supply from the bottom P + N - Cat. Nos. 042 80/82 half-size spacing unit Cat. No. 044 40 FF 0-O MCB 20 A Ph + N Single-pole supply busbar Cat. No. 049 26 2-pole - Cat. No.