Specification

ManualsBrandsLegrand Wiremold ManualsElectrical5 ft. Plugmold USB Multi-Outlet Strip with Tamper Resistant Receptacles - Black

Plugmold

Multioutlet Systems are available in a wide variety

of lengths and fittings and in a variety of finishes to provide

versatile solutions for many applications. Plugmold options

include single or alternating circuits, standard or isolated

ground receptacles, GFCI protection, tamper-resistant

protection, USB charging, Snapicoil

harnesses of prewired

receptacles, and cord-ended units.

Plugmold

Multioutlet Systems are available in black or

ivory ScuffCoat

™

finish, painted white or gray enamel steel,

stylish stainless steel, anodized aluminum and durable

textured ivory nonmetallic. The painted steel product works

with many types of decor and is paintable to integrate with most

color schemes. Durable stainless steel and anodized aluminum

Plugmold products are corrosion-resistant, making them ideal

for labs.

WIREMOLD

Multioutlet Systems

FEATURES & BENEFITS

n Compact, low profile appearance. Enhanced aesthetics

and ideal for installations within minimal spaces.

n Multiple finishes. Choose from black or ivory ScuffCoat,

white or gray painted enamel or durable stainless steel

finishes.

n USB 2.0 & 3.0 compatible charging. Dual-port charging

modules share 2.4 amps of charging capacity and can

charge multiple phones, tablets or other mobile devices

at the same time.

n GFCI protection.

n Tamper-reisistance protection. Prevents the accidental

insertion of foreign objects into receptacles reducing the

risk of shocks or electrocution. Meets 2014 NEC section

406 requirements.

n Single, alternating circuit, and isolated ground wiring

options available. Wiring options to meet virtually any job

or environment requirement.

n Variety of lengths. Installed power and USB charging in

multiple lengths to meet space and location requirements.

n Full range of fittings. Provide flexibility for multiple

installation options or integrations with 2000 or 2400 Series

Raceway systems.

n Snapicoil harnesses with different lengths and

receptacle spacing. Custom solution available for large or

specific use electrical installations.

n Customization available. Plugmold products can be

modified to accommodate virtually any application or

aesthetic need.

n Receptacle spacing options. Select the right configuration

for your application.

n cULus Listed. Safety and reliability in the applications.

Plugmold

Raceway & Multioutlet Assemblies

Plugmold systems are available in a variety of colors

and configurations.

Plugmold Multioutlet systems shown in typical applications.

ED1698R2 – Updated November 2014 – For latest specs visit www.legrand.us/wiremold

Summary of content (24 pages)

PAGE 1
WIREMOLD® Multioutlet Systems Plugmold® Raceway & Multioutlet Assemblies Plugmold® Multioutlet Systems are available in a wide variety of lengths and fittings and in a variety of finishes to provide versatile solutions for many applications. Plugmold options include single or alternating circuits, standard or isolated ground receptacles, GFCI protection, tamper-resistant protection, USB charging, Snapicoil® harnesses of prewired receptacles, and cord-ended units.
PAGE 2
Plugmold Multioutlet Systems Quick Selection Guide FABRICATION Steel PROFILE 2000 Series FINISH OPTIONS Black Scuffcoat Ivory Scuffcoat Gray Enamel White Enamel Stainless Steel LENGTHS 2' 3' 5' 6' [610mm] * [910mm] [1.5m] [1.8m] WIRING CONFIGS. OUTLET OPTIONS O.C.
PAGE 3
Steel Plugmold® Multioutlet Systems Steel Plugmold Multioutlet Systems are available in a wide range of lengths and finishes to provide a versatile solution for many applications. Options include versions with single or alternating circuits, standard, or isolated ground receptacles, Snapicoil® harnesses of prewired receptacles, USB charging options, GFCI protection, tamperresistance, plug-in and cord-ended units.
PAGE 4
Plugmold 2000 Series Steel Part Numbering System 2000 Series Steel Plugmold Series – Example: G20GB306 G RACEWAY: COLOR: Black Gray Ivory White Stainless G B 2 0 = = = = = BK G V WH S 2000 = 20 WIRING CONFIGURATION: GB GBA IG 0 6 3 = GB = GBA = IG* CENTER DISTANCE: LENGTH: 24" 36" 60" 72" [608mm] [915mm] [1.5m] [1.8m] = = = = 2* 3 5 6 6" [152mm] 9" [229mm] 12" [305mm] 18" [457mm] = = = = 6 9** 12 18 * Stainless steel only. ** 6' lengths only.
PAGE 5
Plugmold 2000 Series Steel Multioutlet Systems Ordering Information Product Description/Specifications GFCI Plugmold GFCI Module provides downstream protection for all outlets and connections. Available in 3' [914mm], 5' [1.5m] and 6' [1.8m] lengths with 6" [152mm] receptacle spacing. 15A tamperresistant receptacles. 3-wire, #12 THHN (1 hot, 1 neutral, and insulated ground conductor). .040" [1.0mm] steel housing. Packed 2 per carton.
PAGE 6
Plugmold 2000 Series Steel Multioutlet Systems Ordering Information (continued) Product Description/Specifications USB Plugmold Available in 3' [914mm], 5' [1.5m] and 6' [1.8m] lengths with 6" [152mm] receptacle spacing. 15A tamper-resistant receptacles. 3-wire, #12 THHN (1 hot, 1 neutral, and insulated ground conductor). .040" [1.0mm] steel housing. Packed 2 per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings. USB is 2.4 (shared between 2 ports) 5VDC. 3/4" [19.
PAGE 7
Cord-Ended Plugmold 2000 Series Steel Ordering Information CAT NO. 20-C2* UNIT LENGTH 3' 4" OUTLETS QUANTITY CORD SET LENGTH TYPE SWITCH [1m] 6 Single 6' [1.8m] 12/3 SJT CIRCUIT BREAKER No FINISH Yes Steel – Gray, Ivory * Use “V” prefix for Ivory ScuffCoat finish and “G” prefix for Gray enamel finish. ™ Plugmold 2000 Series Steel with Snapicoil Harness Ordering Information CATALOG WIRING NO.
PAGE 8
2000 Series Raceway Fittings Ordering Information (continued) Catalog No./Item Description/Specifications 2009 Ground Clamp – For connection 1 7/32" of equipment grounding conductor [31mm] to provide additional ground to raceway. Use with BK2015* G2015* V2015* WH2015* Tee – For branches at right angles. Couplings furnished. 6" [152mm] 1 1/2" [38mm] 4" [102mm] BK2010B* G2010B* V2010B* WH2010B* S2010B* Blank End Fitting – For closing the open end of raceway. Use with 2000 Series Raceway.
PAGE 9
2400 Series Plugmold Wire Fill Capacities for Power CABLE WIRE SIZE O.D. TYPE THHN/THWN Inches [mm] NO. OF CONDUCTORS (40% FILL) 2400 POWER WIRING WITHOUT DEVICES 10 AWG 12 AWG 14 AWG 0.166 0.130 0.111 [4.2] [3.3] [2.8] 26 41 57 POWER WIRING WITH DEVICES (Plugmold Series) 8 10 12 14 0.218 0.153 0.122 0.105 [5.5] [3.9] [3.1] [2.7] 2 6 10 – NOTE: AWG AWG AWG AWG Wire capacity limited to maximum of seven conductors due to .025" [.
PAGE 10
Plugmold 2400 Series Steel Multioutlet Systems Ordering Information Product Description/Specifications Plugmold 2400 Series Available in 3' [914mm], 5' [1.5m] and 6' [1.8m] lengths with 6" [152mm], 12" [305mm], 18" [457mm] and 24" [608mm] receptacle spacing. 15A and 20A receptacles. 3-wire, #12 THHN (1 hot, 1 neutral, and insulated ground conductor). .040" [1.0mm] steel housing. Packed 2 per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings. CATALOG NO. 7/8" [22.
PAGE 11
2400 Series Raceway Fittings Ordering Information Catalog No./Item Description/Specifications V2400 7/8" [22.2mm] Catalog No./Item Base and Cover – Base – V2400B .040" [1.0mm] steel. Cover – V2400C .040" [1.0mm] steel. Also available in custom colors. V2411M 90º Flat Elbow – For right angle turns on the same surface (nonmetallic cover). 15/16" [23.8mm] Cross-Sectional Area: 1.39in2 [897mm2] 2 1/16" [52mm] 1 29/32" [48mm] ITEM CAT. NO.
PAGE 12
2400 Series Raceway Fittings Ordering Information (continued) Catalog No./Item Description/Specifications Catalog No./Item 624 2400 and 2400BD Raceway & Cover Cutter – Portable cutter for 2400B and 2400BD Raceway and Cover. Tooled steel construction for clean and easy square cuts. Total manual operation. 624BCK Replacement Blade Kit – Replacement blades and die set for 624 Cutter. V2427GA Duplex Receptacle – 3-wire, 15A, 125V, NEMA 5-15R.
PAGE 13
Aluminum Plugmold® Multioutlet Assemblies Aluminum Plugmold® Multioutlet Systems offer an attractive choice for hospital and commercial labs, as well as for residential applications. The durable finish offers both aesthetics and corrosion resistance. Aluminum Plugmold Series is available in single and alternating circuits, with standard or isolated ground receptacles. It can also be customized to meet virtually any job requirement.
PAGE 14
Plugmold AL2000 Series Aluminum Part Numbering System AL2000 Series Aluminum Plugmold Series – Example: AL20GB306 A L G B 2 0 RACEWAY: COLOR: Aluminum = AL 2000 = 20 WIRING CONFIGURATION: GB GBA IG 0 6 3 CENTER DISTANCE: LENGTH: = GB = GBA = IG* 24" 36" 60" 72" [608mm] [915mm] [1.5m] [1.
PAGE 15
Plugmold AL2000 Series Aluminum Multioutlet Systems Ordering Information (continued) Product Description/Specifications Aluminum USB Plugmold 1 7/16" [37mm] Available in 3' [914mm], 5' [1.5m] and 6' [1.8m] lengths with 6" [152mm] receptacle spacing. 15A tamperresistant receptacles.3-wire,#12 THHN (1 hot, 1 neutral, and insulated ground conductor). .040" [1.0mm] steel housing. Packed 2 per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings.
PAGE 16
Plugmold AL2000 Series Aluminum Multioutlet Systems Ordering Information (continued) Product Description/Specifications Aluminum All USB Plugmold Available in 3' [914mm], and 5' [1.5m] lengths with 12" spacing. USB is 2.4 Amps (shared between two ports) 5VDC. .040" [1.0mm] steel housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings. CATALOG NO. AL20USB312 AL20USB512 FINISH Aluminum Aluminum LENGTH Feet [mm] 3' 5' [915mm] [1.
PAGE 17
AL2000 Series Raceway Fittings Ordering Information Catalog No./Item Catalog No./Item Description/Specifications AL2010A AL2000 Base and Cover – 6063-T5 extruded aluminum, satin anodized finish, .060" [1.5mm] nominal thickness. 1 1/8" Description/Specifications End Fitting – With 1/2" hub adapter. Use with AL2000 Series. 1 3/8" [35mm] [29mm] 1" [25mm] Cross-Sectional Area: 1in2 [645mm2] 1 7/16" [37mm] ITEM CAT. NO.
PAGE 18
AL2000 Series Raceway Fittings Ordering Information (continued) Catalog No./Item AL2038 4 13/16" [122mm] 1 3/8" [35mm] AL2040A AL2043 Catalog No./Item Description/Specification AL2044 AL2044-2 W Round Fixture Box (Solid Base) – Designed for use in hanging fixtures. Cover takes any device with mounting screw centers of 2 3/4", 3 1/2", and 4 1/16" [70mm, 89mm, and [103mm]. Base has concentric 1/2" and 3/4" KOs.
PAGE 19
Nonmetallic Plugmold® Multioutlet Assemblies Nonmetallic Plugmold Mulitoutlet Systems provides a versatile solution for many applications. Plugmold sections offer single or alternating circuits, standard or isolated ground receptacles, and Snapicoil® harnesses of prewired receptacles or cord ended units. Nonmetallic Plugmold has a textured ivory finish with duplex receptacles, and can be customized to accommodate virtually any application.
PAGE 20
Plugmold NM2000 Series Nonmetallic Part Numbering System NM2000 Series Nonmetallic Plugmold Series – Example: NM20GB306 NM 2 0 COLOR: AMPERAGE: Nonmetallic = NM 2000 = 15A 2400 = 20A G B WIRING CONFIGURATION: GB = GBA = IG = GB GBA IG* 0 6 3 CENTER DISTANCE: LENGTH: 48" [1.2m] 60" [1.5m] 72" [1.
PAGE 21
Plugmold NM2000 Series Nonmetallic Multioutlet Systems Ordering Information Product Description/Specifications Plugmold NM2000 Series Available in 3' [914mm], 5' [1.5m] and 6' [1.8m] lengths with 6" [152mm], 12" [305mm] and 18" [457mm] receptacle spacing. 15A tamper-resistant receptacles. 3-wire, #12 THHN (1 hot, 1 neutral, and insulated ground conductor). .040" [1.0mm] steel housing. Packed 2 per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings. CATALOG NO.
PAGE 22
NM2000 Series Raceway Fittings Ordering Information Catalog No./Item Catalog No./Item Description/Specifications NM2010B Blank End Fitting – Use with 1 1/16" [27mm] NM2000 Series. NM2000 Base and Cover – Extruded PVC, ivory textured finish. 1" [25mm] Description/Specifications Cross-Sectional Area: 1.14in2 [735mm2] 1 15/16" [49mm] 1 3/4" [44mm] NM2011 ITEM CAT. NO. Base Cover Base & Cover NM2000B NM2000C NM2000BC LENGTH 8' 8' 5' [2.4m] [2.4m] [1.
PAGE 23
Plugmold NM2000 Series Raceway Fittings Ordering Information (Continued) Catalog No./Item NM2051H 4 1/2" Description/Specifications Catalog No./Item Wall Box Adapter – For feeding raceway from an existing wall outlet; horizontal applications. Provides complete access to wall box for connections. 2 3/4" [70mm] [114mm] NM2048 NM2048-2 Description/Specifications Sure-Snap® Device Box – Cover snaps onto base, no screws required. Cover has twistouts on all sides.
PAGE 24
NOTES Electrical Wiring Systems 60 Woodlawn Street West Hartford, CT 06110 Phone: 1.877.BY.LEGRAND (295-3472) www.legrand.us ED1698R2 – Updated November 2014 – For latest specs visit www.legrand.us/wiremold © Copyright 2014 Legrand All Rights Reserved 570 Applewood Crescent Vaughan, Ontario L4K 4B4 Phone:905.738.9195 www.legrand.