Specification

Nonmetallic Plugmold Mulitoutlet

Systems provides a versatile solution for

many applications. Plugmold sections

offer single or alternating circuits,

standard or isolated ground receptacles,

and Snapicoil

harnesses of prewired

receptacles or cord ended units.

Nonmetallic Plugmold has a textured

ivory finish with duplex receptacles, and

can be customized to accommodate

virtually any application.

Nonmetallic Plugmold Multioutlet Systems are available in a variety

of configurations.

Nonmetallic Plugmold Multioutlet Systems are ideal solutions for a variety of applications.

Nonmetallic Plugmold

Multioutlet Assemblies

CABLE WIRE SIZE O.D. NUMBER OF CONDUCTORS

TYPE THHN/THWN (40% FILL)

Inches [mm] NM2000*/NM2400

POWER WIRING 10 AWG 0.164 [4.2] 15

WITHOUT DEVICES 12 AWG 0.130 [3.3] 31

14 AWG 0.111 [2.8] 45

POWER WIRING 10 AWG 0.153 [3.9] –

WITH DEVICES 12 AWG 0.122 [3.1] 8 **

(Plugmold Series) 14 AWG 0.105 [2.7] 8 **

Plugmold NM2000 Series Wire Fill Capacities for Power

* Wire capacity limited to maximum of seven conductors due to .025" [.6mm] material thickness of cover.

** Including one hot, neutral, and ground wire from the receptacle.

1 3/4"

[44mm]

[25mm]