Specification

17
Catalog No./Item Description/Specifications
AL2010A End Fitting – With 1/2"
hub adapter. Use
with AL2000 Series.
AL2010B Blank End – Use with
AL2000 Series.
AL2051 Box Adapter – For feeding
raceway from an existing
wall outlet.
AL2011 90º Flat Elbow – For right
angle turn on same surface.
Comes with two couplings.
AL2015 Tee – For branch connection of
two runs of AL2000 Raceway.
Three couplings furnished.
AL2017 Internal Elbow – For bending
around internal corners. Two
couplings furnished.
AL2018 External Elbow – For making
90º external corners. Two
couplings furnished.
Catalog No./Item Description/Specifications
AL2000
Base and Cover – 6063-T5
extruded aluminum, satin
anodized finish, .060"
[1.5mm] nominal thickness.
AL2003 Supporting Clip – Mount to
surface with No. 8 flathead
screws. Use with AL2000
Series.
W30/W30G Pressure-Type Wire
Connectors –
W30 – For common connection
of two, three, or four No. 12 or
No.14 solid copper conductors
(White).
W30G – For connection of
equipment grounding of 2, 3, or
4 solid conductors No. 14 or
No. 12 AWG (Green).
300V maximum; 20A
105° C maximum.
AL2000WC Wire Clip – Holds conductors
in place in raceway
(nonmetallic).
AL2001
Coupling – For joining lengths
of raceway. Use with AL2000
Series.
AL2006 Cover Clip – For covering
joint where lengths of cover
or base adjoin. Use with
AL2000 Series.
AL2009 Ground Clamp – Use with
AL2000 Series.
AL2000 Series Raceway Fittings Ordering Information
ITEM CAT. NO. LENGTH MATERIAL
Base AL2000B-5 5' [1.5m] .060 Aluminum
Cover AL2000C-5 5' [1.5m] .060 Aluminum
Base AL2000B-10 10' [3.m] .060 Aluminum
1 3/8"
[35mm]
1"
[25mm]
1"
[25mm]
1 3/8"
[35mm]
4 1/2"
[114mm]
4 1/2"
[114mm]
1 1/2"
[38mm]
#8 Ground Stud
W/Cup Washer
1 7/16"
[37mm]
1 1/8"
[29mm]
Cross-Sectional Area:
1in
2
[645mm
2
]
1 7/16"
[37mm]
1 1/2"
[38mm]
1 5/8"
[41mm]
1"
[25mm]
1 9/16"
[40mm]
4"
[102mm]
1 7/16"
[37mm]
1 9/16"
[40mm]
3"
[76mm]
3"
[76mm]
NOTE: Not for use with
aluminum conductors.
3"
[76mm]
3"
[76mm]
3"
[76mm]
3"
[76mm]
1 7/8"
[48mm]