Specification

16
Product Description/Specifications
Aluminum All USB Plugmold Available in 3' [914mm], and 5' [1.5m] lengths with 12" spacing. USB is 2.4 Amps (shared between two
ports) 5VDC. .040" [1.0mm] steel housing. Packed two per carton. Each unit supplied with one (1)
Coupling and two (2) Blank End Fittings.
Aluminum Alternating Available in 5' [1.5m] length with 9" spacing. 15A tamper-resistant receptacles. 3-wire, #12
USB Plugmold THHN (1 hot, 1 neutral and insulated ground conductor). .040" [1.0 mm] steel housing.
Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings.
USB is 2.4 Amps (shared between two ports) 5VDC.
Please note the charging load on one module
will not affect the charging performance of the other USB modules in the product.
Plugmold AL2000 Series Aluminum Multioutlet Systems Ordering Information (continued)
AL20USB312 Aluminum 3' [915mm] USB 12" [305mm] 3 USB Modules
AL20USB512 Aluminum 5' [1.5m] USB 12" [305mm] 5 USB Modules
CATALOG NO. FINISH LENGTH WIRING CENTER DISTANCE OUTLETS
Feet [mm] CONFIG Inches [mm] QUANTITY & TYPE
AL20GB509TRUSBA Aluminum 5' [1.5m] GB/USB 9" [229mm] 3 Outlets/3USB Modules
CATALOG NO. FINISH LENGTH WIRING CENTER DISTANCE OUTLETS
Feet [mm] CONFIG Inches [mm] QUANTITY & TYPE
1 7/16"
[37mm]
1 1/8"
[29mm]
1 7/16"
[37mm]
1 1/8"
[29mm]
NOTE: AL2000 Series Aluminum Plugmold products are available in an anodized finish with gray receptacles.
All AL2000 Series Plugmold products include two (2) AL2010B Blank End Fittings and one (1) AL2001 Base Coupling unless otherwise indicated in
the product desciption.