Specification

Product Description/Specifications

Aluminum USB Plugmold Available in 3' [914mm], 5' [1.5m] and 6' [1.8m] lengths with 6" [152mm] receptacle spacing. 15A tamper-

resistant receptacles.3-wire,#12 THHN (1 hot, 1 neutral, and insulated ground conductor). .040" [1.0mm]

steel housing. Packed 2 per carton. Each unit supplied with one (1) Coupling and two (2) Blank End

Fittings. Please note the charging load on one module will not affect the charging performance of the

other USB modules in the product.

Aluminum Tamper-Resistant

Available in 3' [914mm], 5' [1.5m] and 6' [1.8m] lengths with 6" [152mm] receptacle spacing. 15A

Plugmold tamper-resistant receptacles.3-wire,#12 THHN (1 hot, 1 neutral, and insulated ground conductor).

.040" [1.0mm] steel housing. Packed 2 per carton. Each unit supplied with one (1) Coupling and

two (2) Blank End Fittings.

Plugmold AL2000 Series Aluminum Multioutlet Systems Ordering Information (continued)

1 7/16"

[37mm]

1 1/8"

[29mm]

AL20GB306TRUSB Aluminum 3' [915mm] GB 6" [152mm] 1 USB, 5 Single 15A

AL20GB506TRUSB Aluminum 5' [1.5m] GB 6" [152mm] 1 USB, 9 Single 15A

CATALOG NO. FINISH LENGTH WIRING CENTER DISTANCE OUTLETS

Feet [mm] CONFIG Inches [mm] QUANTITY & TYPE

NOTE: AL2000 Series Aluminum Plugmold products are available in an anodized finish with gray receptacles.

All AL2000 Series Plugmold products include two (2) AL2010B Blank End Fittings and one (1) AL2001 Base Coupling unless otherwise indicated in

the product desciption.