Specification

7
Catalog No./Item Description/Specifications
2001 Coupling – For joining lengths
of 2000 Series Raceway Base.
aBK2006* Cover Clip – For covering
G2006* joint where lengths of cover
V2006* or base adjoin. Use with
WH2006* 2000 Series.
S2006*
ny point
desired. Base come together.
v
BK2010A3* Entrance End – Offers larger
G2010A3* capacity than V2010A2. 1/2"
V2010A3* trade size KOs on end, each
WH2010A3* side and bottom. 3/4" trade
size KOs on bottom and rear.
Includes ground screw. Use
with 2000 Series.
BK2010A2* Entrance End – For connecting
G2010A2* 2000 Series Raceway with 1/2"
V2010A2* conduit and armored cable
WH2010A2* connectors. 1/2" trade size KOs
S2010A2* on end, each side and bottom.
Includes ground screw. Use
with 2000 Series Raceway.
3/4"
[19.1mm]
* “V” prefix indicates Ivory ScuffCoat
™
finish, “BK” for Black ScuffCoat
™
finish, “G” prefix for Gray enamel finish, “WH” for white enamel finish,
and “S” for stainless steel.
2"
[51mm]
3"
[76mm]
1 9/32"
[58mm]
1 1/2"
[38mm]
2 1/8"
[54mm]
2 7/64"
[53mm]
1 29/32"
[47mm]
2 11/16"
[67mm]
3 22/64"
[94mm]
CATALOG WIRING OUTLETS (15A 120V NEMA 5-15SR) HOLE CUT COVER
NO. LENGTH CONFIG CENTER DISTANCE QUANTITY QUANTITY LENGTH
HOUSING
Feet [meters] Inches [mm] Feet [m]
20GB12* 48' [14.63] GB 12" [305mm] 48 Single 8 6' [1.8m] Steel – Ivory, Gray
20GB18* 48' [14.63] GB 18" [457mm] 32 Single 8 6' [1.8m] Steel – Ivory, Gray
V20GB30 50' [15.25] GB 30" [760mm] 20 Single 10 5' [1.5m] Steel – Ivory
20GBA12* 48' [14.63] GBA 12" [305mm] 48 Single 8 6' [1.8m] Steel – Ivory, Gray
Plugmold 2000 Series Steel with Snapicoil Harness Ordering Information
UNIT OUTLETS CIRCUIT
CAT NO. LENGTH QUANTITY CORD SET LENGTH TYPE SWITCH BREAKER FINISH
20-C2* 3' 4" [1m] 6 Single 6' [1.8m] 12/3 SJT No Yes Steel – Gray, Ivory
Cord-Ended Plugmold 2000 Series Steel Ordering Information
* Use “V” prefix for Ivory ScuffCoat
™
finish and “G” prefix for Gray enamel finish.
Catalog No./Item Description/Specifications
2000* Base and Cover –
Base – 2000B .040" [1.0mm] steel.
Cover – 2000C .025" [.6mm] steel.
Supplied with two (2) 2010B
Blank End Fittings and (1) 2001
Base Coupling.
V2003 Supporting Clip – For temporary
2003 support, while positioning lengths
of raceway base. Use with V/G
2000 Series. V2003 has ivory
finish, 2003 has plated finish.
W30 Pressure-Type Wire Connectors–
W30/W30G
W30 – For common connection
of two, three, or four No. 12 or
No.14 solid copper conductors
(White).
W30/W30G – For connection of
equipment grounding of 2, 3, or
4 solid conductors No. 14 or
No. 12 AWG (Green).
300V maximum; 20A
105° C maximum.
2000WC Wire Clip – Holds conductors
2400WC in place in raceway.
2000 Series Raceway Fittings Ordering Information
1 5/16"
[33mm]
ITEM CAT NO. LENGTH MATERIAL
Base 2000B-5* 5' [1.5m] .040 Steel
Cover 2000C* 5' [1.5m] .025 Steel
Base & Cover 2000BC* 5' [1.5m] .025 Steel
1 9/32"
[33mm]
3/4"
[19.1mm]
Cross-Sectional Area:
0.80in
2
[516mm
2
]
NOTE: Not for use with
aluminum conductors.
2"
[51mm]
* Available in Ivory ScuffCoat
™
finish (“V”) and Gray enamel finish (“G”).