User's Manual

1 2 3

Select Forward. Use the arrow buttons

to move through the choices and then

press the orange button (Enter) to

make your selection.

NXT Program

You don’t need a computer to program your robot. Using

the NXT Program submenu, you can make thousands of

different programs without your computer.

Try this simple program and see how easy it is:

Make the robot go back and forth when its Touch Sensor is pressed.

First, the robot will move forward until the Touch Sensor is pressed,

and then it will move backwards. When its Touch Sensor is pressed

again, the robot will move forward once again. This will continue

indeﬁ nitely until you stop the program.

Make sure that your sensors and motors are connected to the right

ports.

NXT TECHNOLOGY

Select Touch. Select Backward.