User's Manual

Test Your Skills—Program a car to respond to light readings
1. Write a program in Pilot level 3 that makes the car move forward until the light sensor meets a darker refl ection (such as
the edge of the table). Then tell the car to move backward until you stop it by pressing a touch sensor. We recommend
that you program the car to move slowly. Set the motor power level to 2 or 3.
2. You could also program the lamp to be on when moving forward and off when moving backwards.
3. To repeat this program you need to activate loop mode. Select the pink arrow and select the loop icon.
See illustration below.
10