Manual

5
INSERTING AND CHANGE CO
2
-CAPSULE
• Only use 12 g CO
2
capsules.
• For storage remove gas capsules.
• There may be a minor discharge of gas when you remove the gas capsules.
Make sure that your hands do not come into contact with discharged CO
2
gas. This may cause
freezing of the skin. Do not expose the CO
2
cartridge to excessive heat and do not store it at
temperatures exceeding 54°C. Always adhere to the warnings and safety instructions of the
manufacturer on the gas cartridge in respect to handling and storage of a CO
2
gas container.
CAUTION
LOADING THE MAGAZINE
Only use steel BBs cal. 4,5 mm (.177).
NOTE:
Only use flawless BBs: Never use the following BBs:
1
with edges,
2
both halves not
aligned,
3
used, soiled,
4
deformed. Warranty expires if non recommended BB are used.
It’s recommended to use precision BB from Umarex/Walther.
1 2
3 4
CAUTION
c
a
p
a
c
i
t
y
ROUND
50
4
,
5
m
m
(
.
1
7
7
)
STEEL BB
1.
2.
4.
3.
5.
1.
Press the magazine catch.
2.
Remove the magazine.
3.
Pull down the follower
and hold it.
4.
Load BBs. Release the
follower.
5.
Insert the magazine.
1.
Press the magazine catch.
2.
Remove the magazine.
4.
Insert the CO
2
cartridge
as shown.
5.
Turn the piercing screw in; CO
2
cartridge
is pierced.
6.
Insert the magazine.
3.
Turn the piercing screw
downwards.
5.
6.
2.
1.
3.
4.
6 mm
Allen key
p
o
w
e
r
e
d
CO2
2x 12 g