Full Product Manual

Operation (continued)
Controls and Features
RECOIL STARTER
PROTECTIVE SHIELD
CLUTCH
□
□
The recoil starter is attached to the right side of the upper
handle. Stand behind the unit and pull the recoil starter
rope to start the unit.
The tiller shield is located in the rear of the tiller and
it is used to shield you from debris being thrown.
□
The throttle lever starts the tiller forward or reverse function
depending on what gear the tiller is on. The safety lock
ensures that when using the tiller the operator does not
accidently start the forward or reverse action until they are
ready to operate the tiller.
ON/OFF SWITCH
□
The On/Off switch is needed to start and stop the tiller.
2
DEPTH REGULATOR
TINES
CHOKE LEVER
□
□
In hard compacted soil, it helps restrain the tiller's forward
motion. In looser soil, it controls how deeply the tines can dig
into the ground.
Tines are rotating metal blades that dig into the soil.
□
A carburetor choke lever engages or disengages the choke,
subsequentially adjusting the amount of air that is enabled
to flow through the intake of the carburetor.
GEAR LEVERS
□
The tiller gear box is mounted on the tiller frame. One lever
controls 1st, 2nd and reverse gears. The other lever controls
the function of tilling on the soil. The 2 functions are scarify
and furrow.
1st, 2nd and Reverse Gear Lever
13
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Clutch
Safety Lock
Depth Regulator
Protective
Shield
Tines
Choke Lever
On/Off Switch
Recoil Start
Scarify and Furrow Gear Lever