Product Brochure

Operation (continued)
□
□
□
□
The ideal height of the handlebar varies with operator
height and the depth of tilling.
Unscrew nuts (DD) and remove top and bottom bolts (CC)
on each side of the lower handle.
Align lower handle to desired height holes on the
transmission cover mount.
Install bolts (CC) and nuts (DD). Retighten. See Figure 1-16
8
Handle Height Adjustment
17
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Figure 1-16
Transmission Cover
DD
DD
CC
CC
Lower
Handle
Height Adjustment
Holes
□
□
□
□
□
9
Wire Tension Adjustment
Jam Nut
Forward
Cable
Reverse
Cable
Figure 1-17
INCREASE DECREASE
TENSION TENSION
LOOSEN TIGHTEN
□
Proper wire tension is critical to good performance. After
1/2 hour of operation, all cables may have to be adjusted.
After using the tiller for the first time check tension after
every 2 hours of operation.
TO INCREASE WIRE TENSION
Loosen upper jam nut ⑴
Turn the adjusting nut counterclockwise in 1/8”
increments ⑵
Tighten upper jam nut ⑴
Check adjustment.
This procedure can be repeated until conduit adjustment
bolts are fully adjusted. If no more adjustment can be
made, the wire may have to be replaced. See Figure 1-17
(1)
(2)