Product Brochure

Operation (continued)
Controls and Features
RECOIL STARTER
PROTECTIVE SHIELD
FORWARD/REVERSE/SAFETY LOCK LEVERS
□
□
The recoil starter is attached to the right side of the upper
handle. Stand behind the unit and pull the recoil starter
rope to start the unit.
The tiller shield is located in the rear of the tiller and
it is used to shield you from debris being thrown.
□
The forward/reverse lever located on the upper handle
controls the tillers direction. The safety lock ensures that
when using the tiller the operator does not accidently
start the forward or reverse action until they are ready
to operate the tiller.
ON/OFF SWITCH
□
The On/Off switch is needed to start and stop the tiller.
2
DEPTH REGULATOR
TINES
CHOKE LEVER
□
□
In hard compacted soil, it helps restrain the tiller's forward
motion. In looser soil, it controls how deeply the tines can dig
into the ground.
Tines are rotating metal blades that dig into the soil.
□
A carburetor choke lever engages or disengages the choke,
subsequentially adjusting the amount of air that is enabled
to flow through the intake of the carburetor.
OIL DIPSTICK
□
Located on the engine is used to fill oil and measure oil.
This tiller does not come with oil. Oil must be added before
operating it.
Tines
Protective Shield
Recoil Start
Choke Lever
On/Off Switch
Oil Dipstick
14
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Reverse Lever
Forward Lever
Safety Lock
Depth Regulator