Full Product Manual

7 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Assembly

PARTS INCLUDED WITH THE EARTH AUGER

Part Description Quantity

52cc Auger Powerhead, handle bars and

grips

2 8 in. Auger Bit 1

3 Fishtail Point 1

Ø9.5 x 45 mm clevis pin with double wire

snap

5 19 mm spark plug socket 1

WARNING: Do not operate earth auger if it is damaged or

not securely and fully assembled.

TOOLS NEEDED FOR ASSEMBLY

Adjustable Wrench

To Assemble the Fishtail Point to the

Auger Bit

□ Insert the threaded end of the ﬁshtail point into the threaded

hole on the end of the auger bit and rotate clockwise to hand

tighten.

□ To tighten securely, grasp the auger bit shaft with one hand

while placing an adjustable wrench on the ﬁshtail bit point and

tighten until it is securely in place.

To Assemble Auger Bit to Powerhead

□ Insert the power head output shaft into the auger bit shaft and

align the hole in the output shaft with the holes in the auger bit

shaft.

□ Insert the Ø9.5 x 45 mm clevis pin completely through the

aligned holes on the powerhead output shaft and auger bit tube

so it is extended out of the other side.

□ Place the open triangle looped end of the double wire snap

around the exposed end of the Ø9.5 x 45 mm clevis pin to

secure the bit to the power head output shaft.