Full Product Manual

5 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Maintenance, Transporting & Storage of Earth Auger
□ Disconnect the spark plug before performing maintenance.
Secure spark plug boot away from engine and frame to prevent
arcing.
□ Maintain earth auger with care. Inspect unit periodically. If
unit is not working properly or damaged, have it repaired by a
qualified service center.
□ Check for misalignment of moving parts, binding of moving
parts, broken parts, mounting and any other condition that may
affect its operation.
□ Any part that is damaged should be properly repaired or
replaced by a qualified service center.
□ Use only genuine Legend Force® replacement parts and
accessories. Use of any non-Legend Force® parts or
accessories could lead to injury, damage to the unit and will void
your warranty.
□ Do not remove or modify any parts. Removing or modifying parts
could lead to injury, damage the earth auger and will void the
warranty.
□ Keep handles dry, clean and free from oil and grease.
□ Allow engine to cool and empty the fuel tank into an approved
container before storing or transporting in vehicle. Use up
remaining fuel in the carburetor by starting the engine and
letting it run until it stops.
□ When not in use, store unit indoors in a dry location. Store earth
auger above the reach of children or in a locked area out of the
reach of children.
□ For cold weather operation, store the unit in a cool environment
to minimize the possibility of condensation which could lead to
unsatisfactory product performance.
When preparing the earth auger for storage or when earth auger will
not be used for 30 days or more:
□ Inspect and clean the earth auger thoroughly.
□ Lightly oil all external metal surfaces.
□ Remove the spark plug, place a few drops of 2-cycle engine oil
into the cylinder. Pull the recoil starter several times to distribute
the oil. Replace the spark plug.
□ Inspect and clean air filter as required.
NOTICE: To prevent fuel gum deposits in the carburetor and fuel
system, it is recommended to use fuel stabilizer. Follow the stabilizer
manufacturer’s instructions. Run the engine at least 5 minutes after
adding stabilizer.
WARNING: Store unit and fuel in area where fuel vapors
cannot reach sparks or open flames from water heaters,
electric motors or switches, furnaces, etc.