Full Product Manual

14
3
Earth Blade and Fishtail Point
WARNING: Use only the manufacturer’s replacement part
intended for this auger bit. Do not use any other earth blade
or fishtail point. To install any other brand part to this auger
bit can result in serious personal injury. Replace worn or
damaged earth blade or fishtail point.
□ Remove the mounting hardware (bolts and nuts), and take off
the earth blade.
□ Install new earth blade with new mounting hardware.
□ Tighten the bolts to secure blade.
□ To replace the fishtail point, use an adjustable wrench to break
it loose.
□ Then, using your hand, unscrew the fishtail bit completely.
Replace with new part.
4
Adjusting the Governor
The air-fuel mixture is not adjustable. Tampering with the governor
can damage your auger and will void your warranty. Contact our
Technical Support Team at 1-877-527-0313 for all other service and/
or adjustment needs.
5
Maintenance Schedule
Before Use
Wipe up fuel leaks, fuel spillage.
Inspect and clean fuel tank.
25 Hours
Clean cylinder fins and intake cooling vent.
Inspect and clean the air filter.
50 Hours or Every Season
Clean and readjust spark plug gap
(gap: 0.6 – 0.7 mm [0.024 – 0.028 in.]), and replace if
necessary.
Inspect and clean the air filter.
Annually
Replace spark plug.
Maintenance (Continued)