Operation Manual
8
The side controller of the monitor
OSD Key Pad function List
Key Description
Power Power on/Power off
Source Source selection (toggle)
Menu Right/Volume +
Menu Left/Volume -
Menu Up
Menu Down
Menu/Exit Menu/Exit selection
LED ON:
Power Status Condition
Green Power on
Orange Power off
Power saving mode
Select LED on via menu
(Front LED: On)
Off AC off
Power on
Select LED on via menu
(Front LED: Off)
LED OFF:
The LED turn completely off when in the „off“ mode regardless
of the monitor being on or off.
The Remote Control (RCU) Instructions
Input Interface
No Function Description
1 Turns the monitor on and off
2 INFO Provides source and resolution information
3 VGA Selects the PC RGB source
DVI Selects the PC DVI source (55“)
HDMI 1 Selects the HDMI source 1
4 COMP 1 Selects the Component source
AV 1 (VIDEO 1) Selects the Composite Video source
HDMI 2 Selects the HDMI source 2
5 COMP 2 Not available at this model
AV 2 (VIDEO 2) Not available at this model
6 PIP Turns the PIP feature on and off
S-V Selects the S-Video source
HD-SDI 2 Not available at this model
7 SWAP Swaps the main source & sub source picture
8 P-SOURCE Selects the secondary sub-source
9 MENU Opens the monitor’s on-screen menu system.
When the menu system is already open,
pressing this button will select the
previous submenu
, , , Navigates through submenus and settings
10 EXIT Closes the menu system
11 ENTER Selects highlighted menu choices
12 SCALING Toggles between different aspect ratios
(Auto, Native, 4x3, 16x9, 16x10 and Letterbox)
FREEZE Freezes the current source image
MUTE Turns off the sound
BRIGHT Adjusts the brightness
CONTRAST Adjusts the contrast
AUTO Synchronizes the monitor to the source
SOURCE Allows selection
of the different
sources
VOLUME- Decreases the
sound volume
VOLUME+ Increases the
sound volume
HOT KEY:
OSD Menu Lock/Unlock Control
Lock: Press Enter, Enter, Exit,
Exit, Enter and Exit on the
controller by sequence and
OSD will be locked.
Unlock: Press Enter, Enter, Exit,
Exit, Enter and Exit on
the controller by sequence
and OSD will be unlocked.
Input connector
Main Power switch AC in
6 Operating the monitor
Power ON-Stand
by Indicator
Remote Control
Receiver