Operation Manual

4
Use
If you encounter a problem during installation, please contact
your dealer for assistance. Don’t repair or open the monitor
by yourself.
Failure to do so may result in fi re or electrical shock. Contact your
dealer for inspection.
Protect and correctly use the power cord/plug.
 Don‘t press heavily on the power cord/plug.
 Don‘t step on the power cord/plug.
 Before inserting the power plug into the wall outlet,
connect the power cord to the monitor.
 Don‘t operate the monitor with a damaged power cord
or it may damage the monitor.
Using the extension cords (not recommended)
If an extension cord must be used, ensure the voltage rating
exceeds the max power consumption of the monitor, if the
voltage rating is less than the monitor, it will cause the
extension cord to overheat.
Don’t use any kind of liquid on the monitor.
 If liquid is spilled on the monitor, remove the power and
ask an qualifi ed service personnel to check the monitor.
 If the liquid gets on the monitor’s screen, please clean it
with a dry and soft cloth immediately.
 Don’t use any harsh chemical on the monitor.
 If metal or liquid gets into the monitor, it may cause a fi re
or an electrical shock.
Don’t install or remove the power plug with wet hands.
This may cause an electric shock.
If the monitor will not be used for a long period of time, unplug
the monitor.
This may cause premature wear of electrical components
or fi re.
Don‘t push or shake the monitor.
This may cause damage or injury.
 If the glass of the monitor panel is broken, liquid may escape.
Please don‘t touch the liquid.
 If liquid get into your eyes or touches your skin, wash with
the clean water and seek medical attention immediately.
Precautions with the remote control batteries.
 Please only use approved AAA type batteries.
 Please be sure to insert batteries by matching the + and –.
 Don’t recharge, heat, disassemble, short or throw
batteries into a fi re.
 Don’t mix a new battery with a used one.
 Don’t mix different types of batteries together (only use the
specifi ed type). Or, it may cause burn and injury.
Cleaning
If dust has collected on the power plug, removed the plug from
the outlet and clean off the dust.
Dust build-up may cause a fi re.
Take off the power plug before cleaning.
Failure to do so may result in electrical shock or damage.
Cleaning the surface of the monitor.
 When the surface of the monitor becomes dirty, please wipe
the surface lightly with a soft clean cloth.
 If the surface requires additional cleaning, lightly moisten
the cloth with rubbing alcohol.
 Do not to let alcohol enter the monitor as it may cause
electrical shock or damage.