Operation Manual

16
Basic Settings Menu
This menu is used to make initial set-up adjustments to the OSD
(On-Screen Display) menu and other on-screen messages.
OSD Transparent
Set the menu transparency. Press  or , select
the desired level, and then press ENTER.
Range: 0~100
Default: 0
OSD Location
Adjust the menu location on the monitor (Up,
Down, Left, Right).
OSD Zoom
Options: On, Off
Default: Off
OSD Rotation
Select the OSD Rotation. Press   select
the rotation.
Options: 0, 90, 180, 270
Default: 0 degree
OSD Language
Options: English/German/Dutch/French
Default: English
OSD Timeout
Options: 5~120
Default: 30
Sleep Timer
Set a period of time after which the monitor
will switch to standby mode automatically.
Press   to select the desired time limit.
Options: Off, 15, 30, 45, 60, 90, 120 Min
Default: Off
Real Time Clock
Set date, and switch alarm on and off. Use
, , ,  to adjust these options.
Advanced Settings Menu
Auto Adjustment
Forces the monitor to reacquire and lock to the
input signal. This is useful when the signal quality
is marginal. Note: This feature does not
continually reacquire the signal.
Options: No, Yes; Default: No
Image Position
Image location can be adjusted (Only VGA Mode).
Options: Up, Down, Left, Right
Phase
Range: 0~63 (Only VGA Mode)
Clocks
Range: 0~100 (Only VGA Mode)
Flesh Tone
Options: Off, Low, Medium and High (Only
Video Mode)
Default: Off
Front LED
Options: On and Off; Default: On
IRFM
Creates slight frame motion to help avoid
image retention.
Options: On
Default: Off
Baud Rate
Options: 115200, 38400, 19200, 9600
Default: 115200
Monitor ID
Options: 1~ 255
Default: 0
Light Sensor
Options: On and Off; Default: Off
Factory Reset
Restores all settings to their default.
Options: No, Yes; Default: No
VGA ADC Settings
Select ADC setting, User ADC Calibration, and
restore factory default ADC setting.
Options: Default, User
Default: Default