Operation Manual

14
Navigating through the Menu System
1. With the power on, press MENU.
The Image Settings menu will display.
2. Within the menu, use    and ENTER to
navigate through the menus and adjust options.
3. Press MENU to return to the previous menu.
To exit the menu system, press EXIT.
Image Settings Menu
This menu is used for making common image adjustments.
Scheme
Press  or  to select one of the following:
Options: User, Vivid, Cinema, Game, Sport
Default: User
Brightness
Increases or decreases the brightness of picture.
Press  or , select the desired level, and then
press ENTER.
Range: 0~100; Default: 50
Contrast
Increases or decreases the contrast of picture.
Press  or , select the desired level, and then
press ENTER.
Range: 0~100; Default: 50
Sharpness
Adjusts the defi nition of picture.
Press  or , select the desired level, and then
press ENTER.
Range: 0~24; Default: 10
Saturation
Adjusts the brilliance and brightness (only Video
Mode). Press  or , select the desired level,
and then press ENTER.
Range: 0~100; Default: 50
Hue
Increases or decreases the green hue (Only
Video Mode). Press  or , select the desired
level, and then press ENTER.
Range: 0~100; Default: 50
Back Light
Range: 0~100; Default: 80
Color Temp and Gamma
Adjusts red, green, blue gain and red,
green blue offset.
Gamma
Options: Off, 2.2
Default: 2.2
RColor Temp
Options: User, 5000K, 6500K, 7500K and 9300K.
Default: 9300K
Red Gain
Set Color Temperature to “User Mode” in order
to adjust this setting.
Range: 128~384
Default: 256
Green Gain
Set Color Temperature to “User Mode” in order
to adjust this setting.
Range: 128~384
Default: 256
Blue Gain
Set Color Temperature to “User Mode” in order
to adjust this setting.
Range: 128~384
Default: 256
Red Offset
Set Color Temperature to “User Mode” in order
to adjust this setting.
Range: -50~50
Default: 0
Green Offset
Set Color Temperature to “User Mode” in order
to adjust this setting.
Range: -50~50
Default: 0
Blue Offset
Set Color Temperature to “User Mode” in order
to adjust this setting.
Range: -50~50
Default: 0