Operation Manual

10
PIP mode
1. Select the main source – Using the remote, press the desired
source button (VGA, HDMI1, HDMI2, COMP, VIDEO or S-V).
2. Turn on PIP: Using the remote, press PIP.
3. To select the PIP/ sub-source: Using the remote, press P-SOURCE
and use the arrow buttons ( ) to navigate to the desired
sub-source. Press ENTER.
4. To change the size and position of the sub-source: Using the
remote, press P-POSITION to toggle through the options.
5. To switch the main source and the subsource: Using the
remote, press SWAP.
PIP Screen Table
6. To switch audio between the main source and the subsource:
Using the remote, press AUDIO.
7. Note: For additional PIP functionality, press MENU and navigate
to the Display Settings menu. Use the arrow buttons ( ) to
navigate to the desired PIP feature and press ENTER. Press  to
toggle through the associated options and press ENTER to
select the highlighted option.
8. Side by Side (Picture-by-Picture): Press P-POSITION button
choose “Side by side” mode, then the main source and the
subsource will be on the screen display.
HDMI 1 HDMI 2 VGA DVI Component S-Video Video
HDMI 1
--

-

HDMI 2
--

-

VGA

-

DVI
--

-

Component

-

S-Video

-

Video

-
Sub Source
Main Source
PIP
Main
Large PIP
Middle PIP
Small PIP
Main
SWAP
Small PIP
Top-Left
Main Source
Sub Source
Bottom-Left
Top-Right
Bottom-Right
Main
Main PIP