Assembly Instructions Instrucciones de Ensamblaje 60mns SAVE THESE INSTRUCTIONS GUARDE ESTAS INSTRUCCIONES Desk with Hutch Escritorio con conejera C1930028/C1930034 Do Not Return! No Vuelvas! Email or call customer service for help first. Envie correo electrónico o llame al servicio para obtener ayuda primero. 1-214-758-1098/Toll free: 1-883-907-1099 Monday-Friday 9am - 4pm CST customer@legacyhfd.
WARNING This product can expose you to chemicals including Formaldehyde, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/furniture ADVERTENCIA Este producto puede exponerlo a sustancias quím icas, incluyendo el formaldehído, el cual es conocido en el estado de California como causante de cáncer, defectos de nacimiento u otros daños reproductivos. Para obtener más información vaya a www.P65Warnings.ca.
Helpful advice 1. Follow the assembly instructions carefully. 2. Check to ensure all parts, fasteners and hardware are present. 3. To prevent product damage, assemble the furniture on top of the carton. 4. Clean surface of furniture with a duster or damp cloth only. Do not use abrasive cleaners. Consejos útiles 1. Siga a tentamente las instrucciones de montaje. 2. Asegúrese de que la caja contiene todas las piezas, sujeciones y materiales. 3. Monte el mueble sobre la caja para evitar dañarlo. 4.
dwar Hardware/Lista de materiales Ha ITEM Harr 02 IMAGE DESCRIPTION DESCRIPCIÓN QUANTITY A Φ7.8×30 mm Wood dowel Φ7.8×30 mm Perno madera 8 B Cam bolt (large) Perno metálico (Grande) 2 C Cam lock (large) Bloqueo metálico (Grande) 2 D Φ5.8×30 mm Wood dowel Φ5.
Har Hardware/Lista de materiales ITEM IMAGE K DESCRIPTION DESCRIPCIÓN QUANTITY Hex wrench Llave Allen 1 Note/Rema que/Nota r El uso del tornillo incorrecto puede provocar daños al producto. Antes de iniciar la operación de Using the wrong screw will cause damage. Before you begin assembly check to ensure all parts are present. Screws are actual size. tornillo.
Har Necessary tools/Herramientas necesarias Glue Glue not enclosed (We recommend to apply some glue into holes before inserting wood dowels.) Colle non fournie (Nous vous recommandons d’appliquer quelques gouttes de colle dans les trous avant notd’y included ( Weles recommend apply some glue into holes before inserting wood dowels .) introduire chevilles detobois.) Cola, nomadera.) incluida (Le recomendamos colocarunas gotas de cola en los orificios antes de insertar las clavijas de madera.
Attention: In order to help your assembly, do not lock the screw tightly until you have assembled all the other parts. Atención: Con el fin de facilitar su montaje, no apretar el tornillo firmemente hasta que haya ensamblad o todas las otras partes. Step 1/Paso 1 Insert 6 wood dowels (D) into the edge of the back panel (1). Inserte 6 Pernos maderas (D) en el Tablero posterior (1). Dx6 D Step 2/Paso 2 Insert 6 wood dowels (A) into the edge of the fixed shelf (4).
Step 3/Paso 3 Align the dowels on the fixed shelf (4) with the holes on the back panel (1), then combine them with 3 screws (E). Conecte el Tablero posterior (1) al Estante (4) con 3 Tornillos (E). Ex3 E Step 4/Paso 4 Insert 2 wood dowels (A), 2 cam bolts (B) and 2 cam bolts (F) into gable left (2) and gable right (3). Inserte 2 Pernos maderas (A),2 Pernos metálicos (B) y 2 Pernos metálicos (F) en el Tablero izquierdo (2) e Tablero derecho (3).
Step 5/Paso 5 Insert 2 cam locks (G) into the back panel (1) and 2 cam locks (C) into the fixed shelf (4) to combine them with gable left (2) and gable right (3). Conecte el Tablero izquierdo (2) e Tablero derecho (3) al ensamblaje con 2 Bloqueos metálicos (C) y 2 Bloqueos metálicos (G). Cx2 Gx2 G C Step 6/Paso 6 Attach the top (5) to the assembly with 5 screws (E). Conecte el el Planel superior (5) al ensamblaje con 5 Tornillos (E).
Step 7/Paso 7 Insert 2 metal legs (6) into the top (5) with 4 washers (J) and 4 bolts (H),tighten with hex wrench (K). Inserte los Marcos (6) en el Planel superior (5) con 4 Tornillos hexagonales (H) y 4 Washeres (J). Cierralos bien con la Llave Allen (K). Hx4 K Jx4 J K H Step 8/Paso 8 Insert back nail (7) into 2 metal legs (6) with 4 bolts (I),tighten with hex wrench (K). Fije las líneas (7) en los Marcos (6) con 4 Tornillos hexagonales (I).Cierralos bien con la Llave Allen (K).
Maximum weight capacities/Capacidades de carga máxima 5 kg 11 lbs. 40 kg 88 lbs. WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. －This product is intended to hold maximum weight indicated. Exceeding the maximum weight will result in instability and may cause serious injury. －Do not allow children to climb or jump on furniture due to possible accident, injury or death.
1 YEAR WARRANTY BASIC WARRANTY: Homestar® furniture is warranted by Homestar Corporation (Homestar) to the original purchaser for a period of one year from the date of purchase, subject to the following conditions and limitations. 1. Install and operate this item in accordance with the Installation and operating instructions provided with the product at all times. Any alteration, willful abuse, accident, or misuse of the product shall nullify this warranty. 2.
