Manualshelf

Use and Care Manual

ManualsBrandsLegacy Heating ManualsFire Pits56 in. x 21 in. Rectangular Fire Table with Glass Wind Guard, Cover and Table Lid in Bronze
12345678910
2
1
3
7
1. Locate B/C/D and Door Panel with Door -F .
Align hole in all panels and insert M6x25 Bolts ( AA) ,
througn M6 Washer (BB) ,then insert Bolt /Washer through holes .
Loosely tighten with Wrench A (CC) .DO NOT OVERTIGHTEN AS
you will need to adjust the panels to ensure proper alignment
Hardware used
Hardware Used:
2. Attach Propane Tank Strap (HH) to the bottom plate as show in
Figure 2.
3. Turn the Door Knob, open the Door and attach the Bottom Plate (E)
to the assembled Side Panels/Door Panel using M6x25 Bolts (AA)
Hardware Used:
ASSEMBLY
AA
M6x25 x 8
BB
M6 Washer x 8
BB
M6 Washer x 4
AA
M6 x 25 Bolt x 4
HH
AA
BB