Manualshelf

Installation Guide

ManualsBrandsLegacy Heating ManualsFire Pits45 in. 50,000 BTU Square Aluminum Construction Propane Gas Fire Pit Table with Steel Burner, Table Lid and Cover
12345678910
7
1. Locate 3 Panels – C/E/F and Door Panel with Door - H.
Align holes in all panels and insert M6x20 Bolts (AA)
through M6 Washer(BB), then insert Bolt/Washer through holes.
Loosely tighten with Wrench A (CC). DO NOT OVERTIGHTEN as you
will need to adjust the panels to ensure proper alignment.
Hardware Used:
NOTE: Right and Left Panels (E/F) marked 1,2 should match the Door Panel with Door (H) marked 1, 2.
2. Attach Propane Tank Strap (KK) to the bottom plate as show in
Figure 2.
3. Turn the Door Knob, open the Door and attach the
Bottom Plate (G) to the assembled Side Panels/Door Panel
using M6x30 Bolts (DD).
Note: Match Panels and Bottom Plate as 3-3, 4-4, 5-5, 6-6.
Hardware Used:
ASSEMBLY