INSTALLATION, OPERATING & MAINTENANCE INSTRUCTIONS M2-1120 FLEETWOOD CROSS HANDLE 3-HOLE BASIN MIXER
Contents Dimensions 3 Instalation Procedure 4 Parts List 6 Fault Finder 7 Safety Tips, Care and Maintenance 8 Guarantee 9 2
4 13/16" 9 7/16" (240mm) (50mm) 6" (122.7mm) (75mm) 2 15/16" (1mm)~(30mm) (Ø55mm) 1 15/16" Ø 2 3/16" (152mm) Ø 2 3/16" (75mm) 2- 9/ 16 -2 4U NE F- 2A 2-G1/2 2-1/2-14NPSM-2A (1mm)~(30mm) (Ø55mm) 1/16"~1 3/16" (Ø55mm) in Inches (& Millimetres) 1/16"~1 3/16" Ø 2 3/16" 2 15/16" 3 1/8" 4" (102mm) (80mm) Dimensions Whilst every effort is made to ensure accuracy, design and dimensions are subject to change without notice as part of the company’s product development process.
Installation Procedure Steps 1-4 Lefroy Brooks always recommends that plumbing products be installed by a licensed professional. Shut off main water supply before installation. 1 2 Set Screw Alternative nuts 3 4 1 Install left handle assembly, headwork cover and side body. 2 Install other handle assembly, headwork cover and side body. 3 Fit spout and install the connector assembly. 4 Connect flexible hoses. Alternative nuts are supplied in case you want to connect copper pipes instead.
Installation Procedure Step 5 Lefroy Brooks always recommends that plumbing products be installed by a licensed professional. Shut off main water supply before installation. 5 5 Remove aerator and turn on water to remove any left over debris. Re-assemble aerator. Warning! When installing flexible hose, please notice: 1. There should be no torsion or deformation 2. Do not fold into a V or L shape. 3. Do not use if there is any crack or deformation.
Parts List Exploded view 16 17 1 6 2 18 3 19 4 7 8 5 9 10 20 30 21 22 23 24 11 25 12 26 13 31 27 32 28 14 29 15 1 2 3 4 5 6 7 8 9 10 11 Spout assembly (139376W) Oil-seal (010519N) Aerator insert (553661N) Aerator housing (305856-54) Handle (029685H-T) Set screw (075209) O-ring (004026N) Canopy (000113) Escutcheon (071326) O-ring (004072N) Washer (013797) 12 13 14 15 16 17 18 19 20 21 22 Oil-seal (058094) Washer (013006) Nut (009015) Connector (015004W) Handle (029685C-T) Canopy (018295
Fault Finder Fault Cause Rectification Leaks around handle. Cartridge has come loose or damaged. Tighten/reinstall the cartridge or replacement the cartridge if it is damaged. Leaks around the base of spout. Gasket is misfitted or damaged. Check for gasket placement. Aerator leaks or has an inconsistent water flow pattern. Aerator is dirty or misfitted. Unscrew the aerator to check rubber packing or replace the aerator.
Safety Tips, Care and Maintenance Safety Tips If you are soldering during faucet installation,remove cartridges, seats, gaskets and washers prior to applying flame, otherwise you will void the warranty. Cover drain openings to avoid losing small parts. When cutting or soldering pipe, use safety glasses to protect your eyes. Important Points Prior to beginning installation. turn off the cold and hot water lines and open the old faucet to release built-up pressure. Overtightening nuts may cause damage.
Guarantee Guarantee of Quality This product is guaranteed against faulty materials and workmanship for 12 months from date of purchase. For the guarantee to be valid, the unit must be installed by a competent person, in accordance with the instruction booklet. Any part found to be defective during the guarantee period, will (at our option) be repaired or replaced, free of charge, provided the unit has been installed, and properly used in accordance with the instruction booklet.
718-302-5292 www.lefroybrooks.com LEFROY BROOKS INC, 1828 TROUTMAN STREET, RIDGEWOOD, NY, 11385 TELEPHONE: 718-302-5292. FAX: 718-302-4177 The use of trademarks, product design and artwork is subject to licence or agreement with Christo A. Lefroy Brooks. The design registrations, trademark registrations and copyrights are protected by law and the use or reproduction outside the terms of an agreement is prohibited. The right to modify designs and dimensions is reserved.
