Installation & Assembly

Step 1

Installation Procedure

Lefroy Brooks always recommends that plumbing products be installed by a licensed professional.

Shut off main water supply before installation.

This product requires the installation of certified atmospheric vacuum breaker (AVB) installed in-between the

shut off valve and hose inlet. The AVB should be installed so it is vent ports is pointing in other than the

upward direction. Should you be unfamiliar with an AVB, we recommended consulting a plumbing professional.

Tighten the handshower to a shower hose

(not included) by hand only.

Please ensure that the wall outlet of any

installation is placed high enough on the

wall so that it cannot reach the floor if

dropped when in use.

1 Clip (11294)

2 Non-return Valve (519236)

3 Adaptor (067827)

4 O-Ring (072016R)

5 Handle sleeve (108899)

6 O-Ring (004564R)

7 Tube assembly (020958)

8 O-Ring (063056)

9 Stopper (112693)

10 Shower head (112693)

11 Teﬂon tape (203000)

1/2-14NPSM

Ø3"

(Ø76.5mm)

4 1/8"

(104.9mm)

8 1/4"

(209.2mm)

3 9/16"

(90.8mm)

valve

AVB

HOSE