Installation and Operating Instructions

reversing polarity software which reverses the positive (+) and negative) output of the receiver's
battery power to drive a latching solenoid ON/OFF. The SYSTEM is controlled by the remote
transmitter.
The transmitter operates on a (2) 1.5V AAA batteries.
It is recommended that ALKALINE batteries always be used for longer battery life and maximum
operational performance. Before using the transmitter, install the (2) AAA transmitter batteries into the
battery compartment. (Use caution that batteries are installed in the proper direction)
Before using the transmitter, install the (2) AAA transmitter batteries into the battery compartment.
(Use caution that batteries are installed in the proper direction)
KEY SETINGS
ON： Operates unit to on position, manually operated solenoid
ON
OFF： Operates unit to off position, manually operated solenoid
OFF.
MODE：Changes unit from manual mode to thermostat mode.
∧ ：Set the increase temperature in the thermostat function.
∨ ： Set the temperature to decrease in the thermostat
function.
LCD LIQUID CRYSTAL DISPLAYL
1.TEMP：Temperature indication
2.DISPLAY ：Indicates CURRENT room temperature.
3. ：Valve opening indication
7
4
5
6
1
2
3