Manual

FACTORY

NO. PARAMETER NAME RANGE OF ADJUSTMENT DEFAULT

(NOTE 1)

12 TB-13C FUNCTION NONE (01), 0-10 VDC (02), 4-20mA (03), NONE (01)

SELECT PRESET SPEED #3 (04), INCREASE FREQ (05),

EXTERNAL FAULT (06), REMOTE KEYPAD (07),

DB FAULT (08), ACCEL/DECEL #2 (09)

13 TB-15 OUTPUT (SEE PARAMETER 6 - TB-14 OUTPUT) NONE (01)

14 CONTROL TERMINAL STRIP ONLY (01), TERMINAL STRIP

REMOTE KEYPAD ONLY (02), ONLY (01)

TERMINAL STRIP OR REMOTE KEYPAD (03)

15 SERIAL LINK DISABLE (01), 9600, 8, N, 2

9600, 8, N, 2 WITH TIMER (02), (02)

9600, 8, N, 2 WITHOUT TIMER (03),

9600, 8, 3, 1 WITH TIMER (04),

9600, 8, E, 1 WITHOUT TIMER (05),

9600, 8, O, 1 WITH TIMER (06),

9600, 8, O, 1 WITHOUT TIMER (07)

16 UNITS EDITING TENTHS OF UNITS (01), WHOLE

WHOLE UNITS (02) UNITS (02)

17 ROTATION FORWARD ONLY (01), FORWARD

FORWARD AND REVERSE (02) ONLY (01)

19 ACCELERATION TIME 0.1 - 3600.0 SEC 20.0 SEC

20 DECELERATION TIME 0.1 - 3600.0 SEC 20.0 SEC

21 DC BRAKE TIME 0.0 - 3600.0 SEC 0.0 SEC

22 DC BRAKE VOLTAGE 0.0 - 30.0 % 0.0 %

23 MINIMUM FREQUENCY 0.0 - MAXIMUM FREQUENCY 0.0 Hz

24 MAXIMUM FREQUENCY MINIMUM FREQ - 240.0 Hz (NOTE W) 60.0 Hz

25 CURRENT LIMIT 30 - 180 % (NOTE 3) 180 %

26 MOTOR OVERLOAD 30 - 100 % 100 %

NOTE 1: Factory defaults are shown for a 60 Hz base frequency. See Parameter 48 for 50 Hz base

frequency.

NOTE 2: Maximum setting is 999.9 Hz on drives with High Output Frequency option. Consult the

factory.

NOTE 3: If LINE VOLTAGE is set to LOW, maximum setting is 150%.

PARAMETER MENU (cont)