Manual

17
11.0 SM-Plus
™
CONTROL WIRING DIAGRAMS
11.1 SM-Plus
™
TERMINAL STRIP
Shown below is the terminal strip on the main control board, along with a brief description of the
function of each terminal.
NOTE: The function of terminals TB-13A, TB-13B, TB-13C, TB-14, TB-15, TB-30, and TB-31 are
dependent on the programming of certain parameters. Refer to Section 15.0 - DESCRIPTION OF
PARAMETERS.
Additional information on operating the drive from the terminal strip can be found in Section 10.0. The
following diagrams provide a quick reference to wire the drive for the most common configurations.