User guide

13.2.2 MICRO SERIES DISPLAY IN RUN MODE

 WhenthedriveisintheRUNmode,thedefaultdisplaywilllooklikethis:

 AsintheSTOPmode,theENTERkeycanbeusedtotogglethedisplayfromSPEEDto%LOADtoVAC

(motorvoltage):

NOTE: During acceleration and deceleration to the SPEED set point, the DRIVE STATUS will show the

actual drive speed. When the SPEED set point is reached, the DRIVE STATUS will change to RUN (or

STOPifthedriveisdeceleratingtoaSTOP).