Product Manual

Wash-Thru and Multiguard Motors
Used in applications involving moisture, vibration, dust and some
chemical contact. The motor’s windings are impregnated and encapsu-
lated in a thermosetting that protects them from contaminants for long
motor life.
Automotive Duty Motors
Suited for a wide variety of tough applications found in automotive
manufacturing facilities and other industries utilizing U-Frame motors.
Meets or exceeds General Motors GM-7EH and –7EQ, Ford EM1 and
Chrysler NPEM-100 specifications.
Crusher Duty Motors
Ideally suited for size reduction equipment including rock crushers and
pulverizers and other uses the aggregate and construction industries.
They are designed for belted (radial) loads only utilizing roller bearings
on the Drive-end side of the motor.
Washdown-Duty * Single & Three Phase * TENV & TEFC
Extended life in applications requiring regular hose-downs with
cleaning solutions, as in food processing and for applications in wet,
high humidity environments. Also available in direct current designs.
Explosion Proof * Single & Three Phase * TENV & TEFC
Designed and listed for application in hazardous environments having
certain explosive gases or materials present on equipment, such as
blowers, pumps, agitators or mixers.
Chemical Service Motors * Rigid Base
Petrochemical plants, foundries, pulp and paper plants, waste manage-
ment facilities, chemical plants, tropical climates and other processing
industry applications requiring protection against corrosion caused by
severe environmental operating conditions.
Brakemotors * Single & Three Phase
Machine tools, hoists, conveyors, door operators, speed reducers,
valves, etc., when stop and hold performance is required when power is
removed from the motor by the use of a spring-set friction brake.
Resilient Mounted * Single & Three Phase * Moderate Starting
Torques
General purpose applications where quiet operation is preferred for fan
and blower service.
-70-