Quick-Start Guide Versa™ Mediabar™ QSG-0136-001v1.
Versa™ Mediabar™ Quick-Start Guide ClearOne® Contacts Headquarters Headquarters 5225 Wiley Post Way Suite 500 Salt Lake City, UT 84116 Tel: +1.801.975-7200 Sales Technical Support Tel: +1.801.975.7200 sales@clearone.com Tel: +1.801.974.3760 videotechsupport@clearone.com Notices © 2021 ClearOne, Inc, Inc. All rights reserved. Information in this document is subject to change without notice. Document: QSG-0136-001v1.2 October 2021 Important Safety Instructions 1.
Versa™ Mediabar™ Quick-Start Guide 14. This product can interfere with electrical equipment such as tape recorders, TV sets, radios, computers and microwave ovens if placed in close proximity. 15. Class 2 wiring IS REQUIRED. Only qualified personnel should wire and install. 16.
Versa™ Mediabar™ Quick-Start Guide Packing List Verify that you have received all parts associated with each of the components. Inspect your shipment carefully. If the shipment shows obvious signs of damage, retain original boxes and packing material for inspection by the carrier, and contact them immediately. ClearOne is not responsible for product damage incurred during shipment. USB Cable 6 ft (1.
Versa™ Mediabar™ Quick-Start Guide Back View Mounting Bracket Power Port for future use USB 3.0 Type B Port Remote Control Privacy Auto Framing Mute Speaker Tracking Tilt Pan Volume + Volume - Home Zoom In Zoom Out Preset Point Menu Page 4 QSG-0136-001v1.
Versa™ Mediabar™ Quick-Start Guide Mounting the Versa Mediabar Four mounting options are available for the Versa Mediabar. A. Balanced on the Top Bezel of the Monitor Adjust the bracket hinges so the Mediabar balances on the top. B. Mounting Bars Use thumbscrews to attach the mounting bars to the monitor, and then the Mediabar to the mounting bars. Page 5 QSG-0136-001v1.
Versa™ Mediabar™ C. Attach Mounting Bars to Mounting Bracket Quick-Start Guide If the monitor already has a mounting bracket attached, use the thumbscrews and mounting clips to attach the mounting bars to the horizontal bracket. Then use the thumbscrews to attach the Mediabar to the mounting bars. D. Attach to Wall Use appropriate screws and anchor hardware as needed to securely attach each of the L-shaped wall mount brackets to the wall.
Versa™ Mediabar™ Quick-Start Guide Connect 1. Use the USB cable to the Mediabar’s USB 3.0 Type B port to your computer’s USB Type A port. 2. Connect the AC adapter to the Mediabar’s power port. 3. Plug the AC adapter into a standard power outlet. With the Mediabar powered-on and connected to your computer, your operating system recognizes and registers the Mediabar as a device. 4. Launch COLLABORATE Space or another video collaboration application, and then select the Versa Mediabar. 5.
Versa™ Mediabar™ Quick-Start Guide Dimensions 23.70 in (602 mm) 2.91 in (74 mm) 3.74 in (95 mm) 15.28 in (388 mm) Page 8 QSG-0136-001v1.
