Daim Ntawv Qhia Tus Neeg Siv

ManualsBrandsLeej ntshiab ManualsHD CameraClearOne UNITE 200 Pro PTZ HD Camera

UNITE® 200 Pro PTZ HD Camera

Quick-Start Guide

QSG-0142-001v1.0 September 2021

Summary of content (6 pages)

PAGE 1
Quick-Start Guide UNITE® 200 Pro PTZ HD Camera QSG-0142-001v1.
PAGE 2
UNITE® 200 Pro PTZ HD Camera ClearOne® Contacts Headquarters Headquarters 5225 Wiley Post Way Suite 500 Salt Lake City, UT 84116 Tel: +1.801.975-7200 Sales Technical Support Tel: +1.801.975.7200 sales@clearone.com Tel: +1.801.974.3760 videotechsupport@clearone.com Notices © 2021 ClearOne, Inc. All rights reserved. Information in this document is subject to change without notice. Document: QSG-0142-001v1.
PAGE 3
UNITE® 200 Pro PTZ HD Camera Packing List Verify that you have received all parts associated with each of the components. Inspect your shipment carefully. If the shipment shows obvious signs of damage, retain original boxes and packing material for inspection by the carrier, and contact them immediately. ClearOne is not responsible for product damage incurred during shipment. • UNITE 200 Pro Camera • Remote Control • AC Power Adapter with Power Cord • PoE Splitter • RS-232 cable • USB 3.
PAGE 4
UNITE® 200 Pro PTZ HD Camera Back View a b c d e f g h i j a. System Select Switch g. Reserved Port b. RS-232 Out Port h. HDMI Port c. RS-232 In Port i. USB 3.0 Port d. RJ45 Port j. Reserved Port e. Reserved Port k. DC In 12 V Port f. Line In Port l. Power Switch k l Bottom View m n o m. Bottom Switches n. Tripod Screw Hole o. Fixing Screw Hole 5 QSG-0142-001v1.
PAGE 5
UNITE® 200 Pro PTZ HD Camera Connect Make connections as shown in the following diagram: Computer, TV, VCR w/audio input jack, Router/Switch, Speaker Microphone RS-232 (not included) RS-232 (included) Ethernet* (not included) HDMI & USB 3.0 (included) AC Adapter* Audio (not included) Caution: Do not apply power until after you set the switches.
PAGE 6
UNITE® 200 Pro PTZ HD Camera 5 720p50 D - 6 1080p30 E - 7 1080p25 F - Start Up 1. If you are not using the PoE Splitter, connect the AC power adapter to a power source. 2. On the back panel of the UNITE 200 Pro, set the Power Switch to On. When the camera starts, Pan-Tilt rotates to the maximum position of top right, then returns to the center position. This completes the initialization process.