Daim Ntawv Qhia Tus Neeg Siv

Unite® 160 4K Camera
Page 3 QSG-0154-001v1.0 November 2022
Quick-Start Guide
Setup
Installation
This product should be placed on Wall mount or Celling Mount. Avoid contact with any liquid, gas or
solid material that may cause corrosion.
Step 1
Refer to the diagram below to make sure the connections are correct.
Step 2
Connect to the power. The LED light on the front panel indicates the camera is powered on.
Step 3
The process of initialization is complete after the camera pan-tilt rotates to the maximum position of
top right and returns to the center.
Note: If the position preset 0 has been stored, the position preset 0 will be called up after
initialization.