Quick-Start Guide UNITE 180® 4K Panoramic Camera QSG-0131-001v1.
UNITE 180® 4K Panoramic Camera ClearOne® Contacts Headquarters Headquarters 5225 Wiley Post Way Suite 500 Salt Lake City, UT 84116 Tel: +1.801.975-7200 Sales Technical Support Tel: +1.801.975.7200 sales@clearone.com Tel: +1.801.974.3760 videotechsupport@clearone.com Notices © 2021 ClearOne, Inc. All rights reserved. Information in this document is subject to change without notice. Document: QSG-0131-001v1.3, August 2021 Important Safety Information 1.
UNITE 180® 4K Panoramic Camera Packing List Camera Thumb screw 1/2-20-LS mm (x1) Cable, USB 2.0, Type A Male to Type C Male, 3 ft. (1) Wall bracket (x1) Rubber expansion plug (x 2) KA4 x 30 self-tapping screw (x2) Carefully inspect the shipment. If the shipment shows obvious signs of damage, retain the box and packing material for inspection by the carrier. Contact the carrier immediately. ClearOne is not responsible for product damage incurred during shipment.
UNITE 180® 4K Panoramic Camera Monitor Mounting • On the underside of the camera body, open the damped rotating shaft bracket. • Place camera on top of a flat-panel monitor and adjust to your preferred position. Connections Use the included USB cable to connect the UNITE 180 to your computer.
UNITE 180® 4K Panoramic Camera To change the viewing mode, lightly tap the button on the top of the camera. An explanation of the viewing modes is included in the UNITE 180 datasheet, available in ClearOne’s Resource Library. Details about how to use more powerful features of the UNITE 180 are included in the UNITE 180 User Manual, available in ClearOne’s Resource Library.
