Quick-Start Guide UNITE 180® 4K Panoramic Camera QSG-0131-001v1.
UNITE 180® 4K Panoramic Camera ClearOne® Contacts Headquarters Headquarters 5225 Wiley Post Way Suite 500 Salt Lake City, UT 84116 Tel: +1.801.975-7200 Sales Technical Support Tel: +1.801.975.7200 sales@clearone.com Tel: +1.801.974.3760 videotechsupport@clearone.com Notices © 2021 ClearOne, Inc. All rights reserved. Information in this document is subject to change without notice. Document: QSG-0131-001v1.3, September 2021 Important Safety Information 1.
UNITE 180® 4K Panoramic Camera Packing List Camera Thumb screw 1/2-20-LS mm (x1) Cable, USB 2.0, Type A Male to Type C Male, 3 ft. (1) Wall bracket (x1) Rubber expansion plug (x 2) KA4 x 30 self-tapping screw (x2) Carefully inspect the shipment. If the shipment shows obvious signs of damage, retain the box and packing material for inspection by the carrier. Contact the carrier immediately. ClearOne is not responsible for product damage incurred during shipment.
UNITE 180® 4K Panoramic Camera Monitor Mounting • On the underside of the camera body, open the damped rotating shaft bracket. • Place camera on top of a flat-panel monitor and adjust to your preferred position. Connections Use the included USB cable to connect the UNITE 180 to your computer. Type A Connector Type C Connector The UNITE 180’s Type A port, labeled 2.0 Host, can be used as a pass-through, to connect other devices such as a CHAT 50. 2 QSG-0131-001v1.
UNITE 180® 4K Panoramic Camera Starting Up and Selecting a View Immediately after you connect the UNITE 180 to a computer (if the computer is powered-on), Windows recognizes the UNITE 180 and the camera is available to use with your video collaboration software.
