Users Manual

Installing dimmer by itself or with multi-gang
If installing the dimmer in a single gang application, proceed with
Product install introduction. If installing the dimmer in a multi-
gang application, proceed with follow:
Multi-gang application
In multi-dimmer installations, the reduction of the dimmer’s capacity may
be required. Refer to the chart for maximum load per dimmer.
Note: No derating is required for LED or CFL bulb applications.
Maximum Load Per Dimmer for Multi-gang
Load
Single
Two-Gang
Three-Gang
incand
200W
100W
100W
Product install introduction
1. Turn power off at the circuit breaker
2. Remove the existing dimmer and connect the new dimmer as follow