Quick Start Guide IP CAMERA Model: 8B-IP-W3-H0 (1080p, ID:1091200010, A212) 8C-IP-W2-H0 (1080p, ID: 1091200011, A215) V1.0.
1 Safety Information WARNING: Keep out of reach of children. This product contains small magnets and other small parts, which can cause choking or injury if ingested. WARNING: Used batteries should be disposed of at an appropriate recycling center. Do not discard with normal household trash. DO NOT BURN. CAUTION: Do not install ●in wet locations ● Outside the premises (outdoors). ● Near the metal objects and mirrors that cause radio signal attenuation or shading it. ● Near the powerful main wiring.
2 Package Content IP camera unit*1 Mounting kit (Screw*2, wall anchor*2 , Reset pin*1) AC adapter with USB cable*1 Quick start guide *1
3 Product Description 3.
3.2 LED on/off description Status Description Solid Red Power connected and commencing boot up Flashing Red Booting completed and awaiting Wi-Fi router password Or Booting completed and establishing Wi-Fi router connection Solid Green Connection to server established and normal operation Flashing Green Connection to Wi-Fi router completed and commencing internet connection Red and Green Not able to connect to the cloud flashing alternately 3.
Camera 120° (diagonal) wide-angle lens Maximum resolution: 1280x720/ 1920*1080 H.264 Video Compression Infra-red night vision Dimensions 136 mm x66 mm x66mm Net weight 138g 4 Quick Start Guide 4.1 Download and Install the App Please scan the QR code or download from the link below: Arnoo App (for IP camera and other IoT products) iOS：https://www.pgyer.com/MwmZ Android：https://www.pgyer.com/zsBh The IP Camera stand-alone App iOS：https://www.pgyer.
Android: https://www.pgyer.com/v80y 4.2 Register and Login Open the App and it will guide you through creating an account and logging in at the home screen. 4.3 Connect the Camera to Your Wi-Fi Before the adding: Make sure your wireless router has the Internet access and 1Mbps uploading speed or faster, and the Wi-Fi signal at the location where you install the camera is good.
● Choose the correct camera icon as shown in the illustration below. Plug in the camera. The status LED should be flashing green, if it is the first time you are setting up this camera.
Note: If the status LED is not flashing green, then tap the “Don’t see the flashing green?” button and follow the instructions to reset the camera before you can setup it.
Choose the the SSID (name of the home Wi-Fi) you want the camera to connect to, and input the password. Please be noted that the 5GHz band Wi-Fi is not supported by the camera.
Then connect your smart phone to the camera’s AP with the name of “LDS_ipcxx:xx…”. ↓ Tap the button to go to the Wi-Fi settings of your phone, choose the right Wi-Fi SSID, ↓ And then return to this App. Your phone will disconnected with the camera’ AP and connect to the home Wi-Fi , again.
Wait for the camera to connect the home Wi-Fi and comes on-line.
When the adding operation is completed, you can rename the camera and assign a room for it. Now you can watch the live video on your phone. If the adding operation is not successful, please refer to section 5 trouble shooting. 4.4 Main functions of the app 1. Device list. All the cameras that you have added will be shown as device cards, with the latest snapshot, device name, on-line status and the room name. You can select a camera and watch the live video by tapping the snapshot.
Camera name Settings Video storage in Micro SD card (requiring a card in the slot) Camera On/off Status and room of the camera
2. Camera live view. You can enlarge to full screen by putting your phone flat. Push and hold the talk button to make a 2-way talk with the person in front of the camera. 2 types of video quality are optional: SD (standard definition), HD (high definition).
Full screen view Exit full screen view Mute/ unmute Phone speaker Push to talk (Press the X button after talking to hear the sound from the camera)
3. Micro SD card video. In order to enable this function, you need to insert a Micro SD card (up to 64 GB) in the slot for video recording. When the camera detect a good card inserted, it will start record automatically. Caution: Micro SD card does not support hot swap. Remember to turn off the camera’s power before inserting or removing the card to protect your video data. Micro SD card is very small and may be swallowed by babies, please keep the camera with Micro SD card away from babies.
5. Video management: this function is coming soon.
5 Trouble shooting If the default adding camera operation fails Make sure your wireless router has the Internet access, and the Wi-Fi signal at the location where you install the camera is good. Make sure the camera is plugged in and the status LED is on or flashing Reset the camera if the LED is NOT flashing green. Then follow the App to add it. Make sure the camera is not added to other user’s account. If it is, the owner of the camera has to unbind it first.
6 Wall mount In case you need to mount this camera on a wall, please use this figure below to help you to nail screws exactly where they should be. 1. Hold this page against the installation position on the wall, and the 2 small holes will be where the screws nailed into the wall. Then make 2 marks on the wall and nail the screws. 2. Hang the camera on the screws.
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.
IC Statement -English: This device complies with Industry Canada RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
