Quick Start Guide

PROJECT #:
CUSTOMER:
APPROVED BY:
SUBSTRATE:
PD NAME:
DESIGNER:
CUTTER / FILE NAME: VERSION:
DATE:
2019-12-03
1
Ring
Ring19080
Nikiki
Dennis
Flute/c1s
NOTES:
*
THIRD ANGLE
PROJECTION:
CUT LINES:
HALF CUT LINES:
PRESS LINES:
DIMENSIONS:
PERFORATIONS:
DS TAPE:
GLUE AREA:
TEAR LINE:
1"
max
0.5"
Let’s get started.
©2020 Ring LLC or its aliates. Ring, Always Home, and
all related logos are trademarks of Ring LLC or its aliates.
For Z-Wave technical informa-
tion, visit ring.com/z-wave
For additional help, visit:
ring.com/help
Quick Start Guide
In-app Setup
1. Make sure your Ring Alarm is disarmed.
2. In the Ring app, tap Set Up a Device and find the
Contact Sensor in the Security Devices menu.
3. Follow the in-app instructions to complete setup.
Installation
1. Install the sensor and magnet on a door
or window and frame.
2. Clean the area before you peel the backing and
stick on the sensor and magnet.
3. Make sure there is no more than 1 inch (25.4 mm) between
the sensor and magnet when the door or window is closed.
If you’re using the Contact Sensor on a door you use often, choose
Main Door as the placement option. Main doors have Entry and Exit
Delays to prevent you from accidentally triggering the alarm.
Leave at least a 1/2 inch
(12.7 mm) space so you
can open the battery
compartment.
Ensure no more than 1 inch
(25.4 mm) between sensor
and magnet when the door
or window is closed.
Placement
Spacing