User's Manual

4

HowtoconnectaTemperature&HumiditySensor
UsethebuttonatthebottomofthesensortoincludetheTemperature&HumiditySensorintotheZigBee
network.
Temperature&HumiditySensor’sInclusionProcedure:
1. Makesurethesensorispowered.
2. Pressandholdthe
button(reset)for3second.ThiswillcauseaLEDindicatortoflashoncepersecond.
3. Tap“Adddevice”intheLEEDARSONLDSApp.TheLDSAppwillsearchforthedevice.
4. TheLEDindicatorwillturnofftoconfirmasuccessfulinclusion.




Tip
When initially setting up the LEEDARSON Temperature & Humidity Sensor, it is recommended to
performthesetuptaskwithin15feet(4.5meters)oftheZigBeeHub.
Button
(Reset)