User's Manual

(8) Then the screen moves to Menu Options.
※ To return to Menu Options on the process, input CANCEL.
7) OUT OF RANGE
(1) Go to 7.OUT OF RANGE using *(←) and #(→) Key and then press ENTER.
(2) "OUT OF RANGE:" is displayed and you can select ON/OFF using *(←) and #(→) Key
(3) Make it "ON" and then press ENTER.
(4) "Are All Pagers Returned??" is displayed and then press ENTER.
(5) "Unplug All Coasters" is displayed and then press ENTER.
(6) "Message Sent Plug In Pagers" is displayed and transmit Message twice.
(7) With saving, move to Menu Options(Out of Range).
※ To return to Menu Options on the process, input CANCEL.
cf) Out of Range: ON(Message 9494), Out of Range: OFF(Message 9393)
8) TX DEFAULT MSG
(1) Go to 8.TX DEFAULT MSG using *(←) and #(→) Key and then press ENTER.
(2) "TX DEFAULT MSG:" is displayed and you can select ON/OFF using *(←) and #(→) Key.
(3) Input Default message and then press ENTER
(4) Default Message is saved, and it moves to Menu Options.
9) SET FREQUENCY
(1) Go to 9.SET FREQUENCY using *(←) and #(→) Key and then press ENTER.
(2) You can select frequency among 0-9 and then press ENTER.
(3) The frequency is saved, and it moves to Menu Options.
10) SYSTEM BASE ID
(1) Go to 10.SYSTEM BASE ID using *(←) and #(→) Key and then press ENTER.
(2) "SYSTEM BASE ID:" is displayed and you can input the Base ID and then press ENTER.
(3) System Base ID is saved, and it moves to Menu Options.
11) GROUP CALL ID
(1) Go to 11.Group Call ID using *(←) and #(→) Key and then press ENTER.
(2) "GROUP CALL ID(1-3):" is displayed and you can select among 1-3.
(3) If you want to input Group ID#1, "1+ENTER" and then "Set Group ID#1" is displayed.
(4) Input Group Call ID#1 and then press ENTER.
(5) Group ID#1 is saved, and it moves to Menu Options.
※ Group ID#2 and #3 is as same way as Group ID#1.
12) OUT OF RANGE ID
(1) Go to 12.OUT OF RANGE ID using *(←) and #(→) Key and then press ENTER.
(2) "Set Out of Range ID:" is displayed and then input out of range ID.
(3) And then press ENTER.