User's Manual
(4) If you press CANCEL, range test is finished and the screen moves to Menu Options
screen.
※ To return to Menu Options on the process, input CANCEL.
4) PRE-SET MESSAGE
(1) Go to 4.PRE-SET MESSAGE using *(←) and #(→) Key and then press ENTER.
(2) Select ON/OFF using *(←) and #(→) Key. # To set the Pre-Set Default Message.
(3) "PRE-SET DEFAULT MESSAGE(1-4):" is displayed and you can input among 1-4.
(4) After input preset default message then press ENTER
(5) The screen returns to Menu Options screen.
※ To return to Menu Options on the process, input CANCEL.
5) SET PAGER ALERT
(1) Go to 5.SET PAGER ALERT using *(←) and #(→) Key and then press ENTER.
(2) Select one among "Select Alert Type" list using *(←) and #(→) Key, and then press
ENTER.
* Pager Alert Type LIST
1.Vibe Only (9292)
2.Vibe & Flash (9696)
4.Flash & Beep (9595)
3.Flash Only (9797)
5.Flash & Vibe & Beep (9898)
6. Beep Only (8989)
7.Beep & Vibe (8787)
(3) "Are All Pagers Returned??" is displayed and then press ENTER.
(4) "Unplug All Coasters" is displayed and then press ENTER.
(5) "Message Sent Plug In Pager" is displayed and transmit message twice and then move
to Menu Options.
※ To return to Menu Options on the process, input CANCEL.
6) MODE SELECT
(1) Go to 6.MODE SELECT using *(←) and #(→) Key and then press ENTER.
(2) "Mode Select(1-3):" is displayed and you can select Mode Select# among up to 3.
(3) Select Mode Select# using *(←) and #(→) Key and then press ENTER.
(4) If you choose Mode Select#1, then "Mode Select #1:OFF" is displayed.
(5) You can select ON/OFF using *(←) and #(→) Key and then press ENTER
(6) You can set Mode Select#2,3 as same way as Mode Select#1