User's Manual

→ Before this process, Go to 4.PRE-SET MESSAGE and make PRE-SET MESSAGE:ON
(1) Input corresponding pager number and then press ENTER.
(2) When "Enter Pre-Set Message(1-4):" is displayed, input nothing and then press ENTER.
(3) When "ENTER MESSAGE:" is displayed, input no message and then press ENTER.
(4) "Sending Message Please Wait" is displayed and transmit Pre-Set Default Message.
※ To return an initial screen on the process, input CANCEL.
2) To send the preset message desired
→ Before this process, Make the Pre-Set Msg ON.
(1) Input corresponding pager number and then press ENTER.
(2) When "Enter Pre-Set Message(1-4):" is displayed, input number among 1-4 and then
press ENTER.
(3) When "ENTER MESSAGE:" is displayed, input no message and then press ENTER.
(4) "Sending Message Please Wait" is displayed and transmit selected Pre-Set Message(1-4).
※ To return an initial screen on the process, input CANCEL.
5. TRANSMIT INDIVIDUAL PAGER NUMBER
1) Set Default Msg:OFF in Menu Options
* In initial screen, input desired pager number and push SEND then No Message is
transmitted.
2) Set Default Msg:ON in Menu Options
* In initial screen, input desired pager number and push SEND then Message which is set
in Set Default Msg is transmitted.
Ⅳ. SETUP MENU
1. MENU OPTIONS
* SET CURRENT TIME
* PAGER SLEEP TIME
* SET RECEIVER
* RANGE TEST
* PRE-SET MESSAGE
* SET PAGER ALERT
* MODE SELECT
* OUT OF RANGE
* TX DEFAULT MSG
* SET FREQUENCY
* SYSTEM BASE ID