User's Manual

* If you want to setup the number of Numeric pagers, press "3+ENTER"
* And then you should specify the range of Numeric Pagers.
* For example, if you want to set 26 Numeric Pagers at the range of 41-66, input
"41+ENTER+66+ENTER"
* Pager Priority : Smart Call > Alpha > Numeric
→ It means if there are duplicated pager number, the Smart Call message is prior than
Alpha and Numeric message.
Ⅲ. SEND A PAGE
1. SMART CALL MESSAGE (If the pager type is set to 1.Smart Call in menu 14. PAGER
TYPE SET-UP)
1) Input corresponding number and then press ENTER.
2) Input message in ENTER MESSAGE: (Maximum available up to 128 characters) and then
press ENTER.
3) Transmit message and return to initial screen. (Sending Message Please Wait)
※ To return to an initial screen on the process, input CANCEL.
2. ALPHA MESSAGE (If the pager type is set to 2.Alpha in menu 14.PAGER TYPE SET-
UP)
1) Input corresponding pager number and then press ENTER.
2) Input message in ENTER MESSAGE (Maximum available up to 128 characters) and then
press ENTER.
3) Transmit message and return to initial screen. (Sending Message Please Wait)
※ To return to an initial screen on the process, input CANCEL.
3. NUMERIC MESSAGE (If the pager type is set to 3.Numeric in menu 14.PAGER TYPE
SET-UP)
1) Input corresponding pager number and then press ENTER.
2) Input message in ENTER MESSAGE:(Maximum available up to 16 characters) and then
press ENTER.
3) Transmit message and return to initial screen. (Sending Message Please Wait)
※ To return to an initial screen on the process, input CANCEL.
4. PRE-SET MESSAGE(in case set it ON)
1) To send the preset default message