User's Manual

[ Alpha & Serial Transmitter Version ]
Ⅰ. PREFACE
Pager transmitter is the desktop paging system capable of addressing more than
1000 pagers with Alpha message or Numeric message.
Ⅱ. TURNING THE TX ON/OFF & PAGER NUMBER SETUP
1. TX POWER ON/OFF
* Plug the Pager Transmitter A/C Adaptor into the Pager Transmitter and then into a
standard 110 outlet.
* And the initial LCD screen is as below.
2. PAGER NUMBER SETUP
* Press SETUP and then input operational password(2580) and then ENTER
* Go to 14. PAGER TYPE SET-UP using *(←) and #(→) Key and then ENTER
* Now, 3 kinds of Pager type is displayed as below.
PAGER TYPE(1-3):1
1. Smart Call
2. Alpha
3. Numeric
1) Smart Call Pager Setup
* If you want to setup the number of Smart Call pagers, press "1+ENTER"
* And then, you should specify the range of Smart Call Pagers.
* For example, if you want to set 30 Smart Call Pagers at the range of 1-30, input
"1+ENTER+30+ENTER"
2) Alpha Pager Setup
* If you want to setup the number of Alpha pagers, press "2+ENTER"
* And then you should specify the range of Alpha Pagers.
* For example, if you want to set 20 Smart Call Pagers at the range of 51-70, input
"51+ENTER+70+ENTER"
3) Numeric Pager Setup