User's Manual

(4) Out of Range ID is saved, and it moves to Menu Options.
13) SET BAUD RATE
(1) Go to 13.SET BAUD RATE using *(←) and #(→) Key and then press ENTER.
(2) "Set Baud Rate(1-3):" is displayed and you can select among 1-3
※ Baud Rate List
1. 512BPS
2. 1200BPS
3. 2400BPS
(3) Select Baud Rate and then press ENTER.
(4) Baud Rate is saved and it moves to Menu Options.
14) PAGER TYPE SET-UP
(1) Go to 14.PAGER TYPE SET-UP using *(←) and #(→) Key and then press ENTER.
(2) Select Pager Type among 1-3(Smart Call / Alpha / Numeric)
※ Smart Call
1. Press "1+ENTER" and then you can input the range of Smart Call
2. If you want to set the Smart Call Pager from 1 to 20, press "1+ENTER+20" and
then ENTER.
3. The range of Smart Call is saved and then it moves to Menu Options.
※ To set the range of Alpha pager and Numeric pager is as same as Smart Call pager
setting.
※ Smart Call has the priority than Alpha and Numeric.
※ Pager Priority : Smart Call > Alpha > Numeric
※ When the range of Smart Call pagers and Alpha pagers are interrupted, interrupted
range is followed by Smart Call.
15) SET Power Up MSG
(1) Go to 15.SET Power Up MSG using *(←) and #(→) Key and then press ENTER.
(2) And then input password(2486).
(3) "Enter Message:" is displayed and you can input initial message.
(4) After input initial message and then press ENTER.
(5) Initial message is saved and it moves to Menu Options.
※ The initial message comes on when you separate your pagers from its charger.
16) STREAMING MSG
(1) Go to 16.STREAMING MSG using *(←) and #(→) Key and then press ENTER.
(2) "STREAMING MSG:" is displayed and you can select ON/OFF.
(3) If you select STREAMING MSG ON, you should input password.