User's Manual

※ Smart Call
1. Press "1+ENTER" and then you can input the range of Smart Call
2. If you want to set the Smart Call Pager from 1 to 20, press "1+ENTER+20" and then
ENTER.
3. The range of Smart Call is saved and then it moves to Menu Options.
※ To set the range of Alpha pager and Numeric pager is as same as Smart Call pager
setting.
※ Smart Call has the priority than Alpha and Numeric.
※ Pager Priority : Smart Call > Alpha > Numeric
※ When the range of Smart Call pagers and Alpha pagers are interrupted, interrupted
range is followed by Smart Call.
15) SET Power Up MSG
(1) Go to 15.SET Power Up MSG using *(←) and #(→) Key and then press ENTER.
(2) And then input password(2486).
(3) "Enter Message:" is displayed and you can input initial message.
(4) After input initial message and then press ENTER.
(5) Initial message is saved and it moves to Menu Options.
※ The initial message comes on when you separate your pagers from its charger.
16) STREAMING MSG
(1) Go to 16.STREAMING MSG using *(←) and #(→) Key and then press ENTER.
(2) "STREAMING MSG:" is displayed and you can select ON/OFF.
(3) If you select STREAMING MSG ON, you should input password.
(4) Input password(2486) and then press ENTER.
(5) "Enter Streaming MSG:" is displayed and you can input first Streaming MSG and then
press ENTER.
(6) Then you can input second Streaming MSG and then ENTER.
(7) Then you can input third Streaming MSG and then ENTER.
(8) Then Message Interval is displayed and you can input the message interval.
※ Message Interval means the terms of each Streaming MSG.
For example, if you make the message interval 1 minute, the first Streaming Message
lasts 1 minute and then it changes to second Streaming MSG. The second Streaming
Message also lasts 1 minute and then it changes to third Streaming Message.
Alpha Paging System User Manual